AVSPARE.COM
parts catalog

LINK 0544515 - Caterpillar



0544515 LINK Caterpillar parts LINK
Rating:
46
Alternative (cross code) number:
CA0544515
054-4515
0544515
Caterpillar 0544515 LINK
Weight: 0.010 pounds 0 kg.

Buy LINK 0544515 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Image1.1.1
Image1.1.2
Image1.1.3
Image1.1.4
Image1.1.5
Image1.1.6
Group 2 (330C)
Image1.2.1
Image1.2.2
Image1.2.3
Image1.2.4
Image1.2.5
Image1.2.6
Image1.2.7
Group 1 and 2
-Needle valve should be adjusted so that fan speed may be set to 250 ?C 350 rpm at the engine accelerator dial position 10 (high idle).
-Adjustment of a needle valve can be performed by screwing the adjustment screw all the way in the first, then by backing it out. (See attached fig)
-For Reference, the above mentioned fan speed can be obtained by loosening the screwapproximately to 3 revolutions.
(NOTE)
1.Adjustment of a needle valve (fan speed) after re-flashing the machine software can be performed only when the hydraulic oil temperature is 35degC or less.
2.If the hydraulic oil temperature is above 35degC, let the machine run at low idling with no-load until the hydraulic oil temperature decreases to 35degC or less.
3.If the hydraulic oil temperature does not decrease to 35degC or less by the above procedure in summer , temporarily disconnect the hydraulic oil temperature sensor harness. This will force the machine to run in a quasi-low fan speed mode, allowing for adjustment of a needle valve.
Image1.3.1
Install the wiring harness provided as shown in the diagram
Image1.4.1
Image1.4.2
Image1.4.3
Image1.4.4
Update the machine controller ECM
Using ET, re-flash the machine controller ECM by using the update software provided.
Corresponding software
2797699 330C STD Machine
2797700 325C STD Machine
2797701 322C STD Machine
2909381 330C Hi Ambient Machine
2909382 325C Hi Ambient Machine
2909383 322C Hi Ambient Machine


Parts link Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.