1151848 LINK AS-TRACK Caterpillar parts
320B, 325B, OEMS
Rating:
Alternative (cross code) number:
CA1151848
115-1848
1151848
CA1151848
115-1848
1151848
Weight: 1560 pounds 707 kg.
EXCAVATOR, UNDERCARRIAGE,
Number on catalog scheme:
1
For full view, you need register
Information:
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
The oil level should be checked before starting the engine.
Park the machine on a level surface. Engage the parking brake and lower the dump body.
Raise the hood. Refer to Operation and Maintenance Manual, "Hood Control".
Illustration 1 g00796822
Wipe oil filler cap (1) and oil filler tube (2). Note: The oil level dipstick is integral with the oil filler cap for the transmission oil. Oil filler tube (2) for the torque converter and transmission oil is located on the right side of the machine.
Turn the handle on the oil level dipstick in order to remove the dipstick. Remove the oil level dipstick.
Clean the dipstick by wiping with a clean cloth.
Install the dipstick fully.
Remove the dipstick.
Illustration 2 g00788077Note: The oil level dipstick is marked "COLD SAFE START" and "HOT LOW IDLE".
Check the oil level on the "COLD SAFE START" portion of the dipstick. The engine can be started if the oil is anywhere within the shaded area. Do not add oil if the level is toward the bottom of the "COLD SAFE START" shaded area. An oil level that is anywhere in this range is normal.
Guide the dipstick down the filler tube and turn the handle on the dipstick in order to make the seal between the filler tube and the filler cap.
Lower the hood.
Start the engine. Operate the machine until the temperature of the oil is at normal operating temperature.
Park the machine on a level surface. Engage the parking brake. Allow the engine to operate at low idle.
Raise the hood. Refer to Operation and Maintenance Manual, "Hood Control". Turn the handle on the dipstick in order to remove the dipstick. The portion of the oil level dipstick that is marked "HOT LOW IDLE" indicates the correct transmission oil level. Refer to illustration 2.
Clean the dipstick by wiping.
Install the dipstick fully.
Remove the dipstick and check the oil level.
Check the oil level on the "HOT LOW IDLE" portion of the dipstick. Maintain the oil level within the shaded area on the dipstick. If necessary, add oil through filler tube (2). Refer to Operation and Maintenance Manual, "Lubricant Viscosities" and Operation and Maintenance Manual, "Capacities (Refill)".
Guide the dipstick down the filler tube and turn the handle of the dipstick in order to make the seal between the filler tube and the filler cap.
Shut off the engine and close the hood.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts link Caterpillar catalog:
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 ...
315B, 315B L, 317B LN, 318B, 320B, 325B L, 330B L, 345B L
318B, 320B, 322, 325, 325 L, 325 LN, 325B L, 330B L, 345B L
318C, 319C, 320B, 320C, 320C FM, 320C L, 321C, 322C, 325B L, 325C, 325C L, 330B L, 330C, 345B II, 345B L
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
1090, 1190, 320C FM, 320D, 320D FM, 320D FM RR, 517, 953C, D5H, D5H XL, D5HTSK II, D5R LGP, D6K LGP, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, D6N OEM, OEMS, PL61, TK711, TK721
320 L, 320B, 320C, 320N, 325, 325 LN, 325B L, 325C, 325C FM, 330, 330 FM L, 330C L, 345B II, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 375, 5080
322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L
322B, 322B LN, 325B, 325B L, 330B L
315B L, 317B LN, 318B, 320, 320 L, 320B, 320B U, 320N, OEMS
3Q6544
LINK AS-TRACK
OEMS
OEMS
3Q6502
LINK AS-TRACK
OEMS
OEMS
2668713
LINK GP-STEERING
RM-500
RM-500
2357089
LINK GP-STEERING
RM-300, RM-500
RM-300, RM-500
2223058
LINK AS-TRACK
AP-1055D, AP-655D, BG-245C, BG655D
AP-1055D, AP-655D, BG-245C, BG655D