LINK & BEARING AS 1384371 - Caterpillar

Illustration 1 g01204055
Length of the stroke ... 706 mm (27.8 inch) (1) Bearing Outside Diameter of the bearing ... 78.125 0.013 mm (3.0758 0.0005 inch) Inside Diameter of the bearing ... 65.322 0.020 mm (2.5717 0.0008 inch)Note: After assembly, the bearings can not extend beyond the surfaces of the cap. (2) Torque for the set screw ... 25 6 N m (18.0 4.0 lb ft) (3) Before installation, lubricate the threads. Torque for the nut ... 2200 220 N m (1623 162 lb ft) (4) Before assembly, lubricate the sealing lip with the fluid that is being sealed. (5) Before assembly, apply 4C-4032 Bearing Mount Compound to the wiper seal groove. (6) Before assembly, lubricate the threads with clean grease. Diameter of the lands ... 57.48 0.03 mm (2.2630 0.0012 inch) Torque for the head ... 600.0 130.0 N m (440.00 95.00 lb ft) (7) Sleeve bearing Outside Diameter of the bearing ... 63.094 0.013 mm (2.4840 0.0005 inch) Inside Diameter of the bearing ... 50.302 0.020 mm (1.9804 0.0008 inch)Note: After assembly, the bearings can not extend beyond the surfaces of the rod. (8) Torque for the bolts ... 47 9 N m (35 7 lb ft) (9) Diameter of the rod ... 57.100 0.038 mm (2.2480 0.0015 inch) (10) Diameter of the cylinder ... 107.95 0.08 mm (4.250 0.003 inch) (11) Before assembly, apply 155-0695 Thread Lock Compound to the threads. Torque for the retainer ... 35 5 N m (26.0 4.0 lb ft)