LINK GP-STEERING 1416140 - Caterpillar

Lifting the Engine
Failure to follow recommended procedures for handling or transporting engines can lead to engine damage.To avoid possible engine damage, use the following procedure.
When you lift the engine or when you move the engine, use the following procedures in order to prevent engine damage.
Do not tilt the engine to an extreme angle unless the engine oil is first drained from the engine oil pan.
Do not turn the engine onto a side or an end surface unless the engine oil is first drained from the engine oil pan.
If the engine oil is not drained prior to tilting the engine or turning the engine onto a side or an end surface, the engine oil from the engine oil pan can flow into the intake manifold and the cylinder bores. This situation could cause a hydraulic lock in the engine. Hydraulic lock can damage the engine.
The engine oil should be refilled to the correct level before the engine is started. Engine and Components
Left Front View
Illustration 1 g00757012
(1) Water temperature regulator housing
(2) Valve mechanism cover
(3) Engine oil filler cap
(4) Fuel injection nozzle
(5) Fuel filter
(6) Serial number plate
(7) Fan drive housing
(8) Water pump
(9) Fuel injection pump
(10) Crankshaft pulley
(11) Engine oil cooler
(12) Engine oil level gauge
(13) Engine oil filter Right Rear View
Illustration 2 g00757018
(14) Air inlet heater
(15) Alternator
(16) Flywheel housing
(17) Flywheel
(18) Fuel transfer pump
(19) Electric starting motor
(20) Engine oil pan