LINK 1493132 - Caterpillar

Remove bolt (16). Remove washer (17).
Illustration 7 g01252804
Illustration 8 g01252806
Remove bolts (18).
Install Tooling (A). Remove remaining bolts (18).
Illustration 9 g01252807
Slide engine front support (19) away from engine (10). Attach a suitable lifting device to engine front support (10). Remove engine front support (10). The weight of engine front support (10) is approximately 50 kg (110 lb). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud 1/2 −13 by 4 inch 2
Illustration 10 g01252809
Install Tooling (A).
Illustration 11 g01252807
Attach a suitable lifting device to engine front support (10). Install engine front support (10). The weight of engine front support (10) is approximately 50 kg (110 lb).
Remove the suitable lifting device and slide engine front support (19) toward engine (10).
Illustration 12 g01252806
Illustration 13 g01252805
Install bolts (18). Remove Tooling (A).
Illustration 14 g01252803
Install washer (17). Install bolt (16). Tighten bolt (16) to a torque of 900 100 N m (663 73 lb ft).
Illustration 15 g01252802
Install washer (13). Install bolt (12). Tighten bolt (12) to a torque of 900 100 N m (663 74 lb ft). Position tube (14). Install bolt (15) and (11).
Illustration 16 g01252801
Remove the suitable lifting device from engine (10).
Illustration 17 g01252799
Install support assembly (9).
Illustration 18 g01252798
Install sheet assembly (8). Install bolt (6).
Install hose (7).
Illustration 19 g01252796
Install support assembly (4). Install bolts (5). Install bolts (2).
Install sheet assembly (3). Install bolt (1).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper filling procedure. End By:
Install the crankshaft vibration damper and pulley.
Install the cooling package enclosure.
Install the engine enclosure.