LINK AS-TRACK 1689007 - Caterpillar

Illustration 1 g03827735
Table 1
Specification for 366-6093 Articulation Cylinder and Mounting Gp    
Item    Qty    Part    Specification Description    
1     2     2G-5672 Washer     As required, insert washers to fill gap, ensure that maximum gap is less than
1.0 mm (0.04 inch), ensure that at least one washer is on both sides of cylinder eye.
Thickness is
1.6 mm (0.06 inch).    
2     2     386-7410 Pin As     Before assembly, apply black Loctite Graphite-50 to the surface.
Diameter is
60.350 0.025 mm (2.3760 0.0010 inch).    
3     8     215-9690 Washer     As required use the washers at both ends of cylinder until gap is less than or equal to
1.0 mm (0.04 inch), washers are to be divided equally on top and bottom to ensure proper assembly.
Thickness is
4 mm (0.2 inch).    
4     4     7K-9205 Lip Type Seal     Before placing washers, install seals to cylinder top and bottom.    
5     12     112-8764 Thrust Washer     As required use the washers at both ends of cylinder until gap is less than or equal to
1.0 mm (0.04 inch), washers are to be divided equally on top and bottom to ensure proper assembly.
Thickness is
0.762 0.813 mm (0.0300 0.0320 inch).    
6     2     386-7411 Pin As     Before assembly, apply black Loctite Graphite-50 to the surface.
Diameter is
63.500 0.025 mm (2.5000 0.0010 inch).