LINK AS-CLA 1885595 - Caterpillar

Illustration 3 g01397176
Remove bolts (4).
Illustration 4 g01397190
Remove panel (5).
Illustration 5 g01397195
Remove bolt (7) and remove panel (6).
Illustration 6 g01397200
Loosen screw (10) and remove bolts (8). Remove cover (9).
Illustration 7 g01397207
Cut cable strap (12) and disconnect harness assembly (11).
Illustration 8 g01397209
Disconnect harness assemblies (13) and reposition harness assemblies (13) through the grommet.
Remove bolt (14) and repeat on the other side.
Illustration 9 g01397239
Remove bolt (15) and repeat on the other side. Remove blower motor (16). Installation Procedure
Note: Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 10 g01397239
Position blower motor (16). Install bolt (15) and repeat for the other side.
Illustration 11 g01397209
Position harness assemblies (13) through the grommet and connect harness assemblies (13).
Install bolt (14) and repeat on the other side.
Illustration 12 g01397207
Connect harness assembly (11) and install new cable strap (12).
Illustration 13 g01397200
Position cover (9) and install bolts (8). Tighten screw (10).
Illustration 14 g01397195
Position panel (6) and install bolt (7).
Illustration 15 g01397190
Install panel (5).
Illustration 16 g01397176
Illustration 17 g01397158
Install bolts (4).
Install bolts (3).
Illustration 18 g01397146
Position panel (2) and install bolts (1).