LINK AS-TRACK 2102016 - Caterpillar

ACTION REQUIRED
The parts should have already been provided to the dealer. If a dealer does not have the parts, have the Dealer Technical Communicator (TC) submit a request for the parts to CPI number 398123 through CPI Feedback within the Service Information Management System (SIMSi).
Install support brackets for the charge air cooler outlet pipe per the attached Rework Procedure.
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 7.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SUPPORT BRACKETS ON THE AIR SYSTEM
MODELS INVOLVED - CERTAIN SPF743 TRAILER MOUNTED PUMPERS
Dear Cat Product Owner:
The compressor outlet pipe needs to be inspected and a bracket added on the products listed below. The existing compressor outlet pipe can crack allowing dirt to enter the engine. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 20Feb2018 when scheduling this service.
We regret the inconvenience this may cause you, and urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 20Feb2018 Service Letter
Rework Procedure
Parts Overview
BRACKET KIT
?QTY 1 ?5475930 BRACKET
?QTY 1 ?5475931 BRACKET
?QTY 2 ?5533886 CLAMP-TOP (Modified 8T5441)
?QTY 2 ?5533887 CLAMP-BOTTOM (Modified 8T5442)
?QTY 3 ?8C3121 BOLT
?QTY 3 ?8T4224 WASHER
?QTY 3 ?8T2501 BOLT
?QTY 6 ?7X0575 WASHER
?QTY 3 ?2K4973 LOCKNUT
?QTY 2 ?4L9337 BOLT
?QTY 4 ?5P1075 WASHER
?QTY 2 ?2K4973 LOCKNUT
Image1.1.1
Engine Side Installation
Step 1
Remove Hardware from Three Specified Locations (Refer to Image 1.2.1)
Step 2
Add Support Bracket (5475930) at Tube Flange
?QTY 3 ?8C3121 BOLT
?QTY 3 ?8T4224 WASHER
Step 3
Add Clamps to Tube
?QTY 1 ?4L9337 BOLT
?QTY 2 ?5P1075 WASHER
?QTY 1 ?2K4973 LOCKNUT
Image1.2.1
Radiator Side Installation
Step 1
Remove Hardware from Three Specified Locations (Refer to Image1.3.1)
Step 2
Add Support Bracket (5475931) at Tube Flange
?QTY 3 ?8T2501 BOLT
?QTY 6 ?7X0575 WASHER
?QTY 3 ?2K4973 LOCKNUT
Step 3
Add Clamps to Tube
?QTY 1 ?4L9337 BOLT
?QTY 2 ?5P1075 WASHER
?QTY 1 ?2K4973 LOCKNUT
Image1.3.1