LINK 2299231 - Caterpillar

Illustration 2 g03667578
445-1372 Auxiliary Control Ar
Installation
The 445-1372 Auxiliary Control Ar is divided into several modules. Each module has a Special instruction associated to the module. Install the modules in the following order:
445-1370 Control Valve Gp
444-9889 Front Lines Gp
379-4615 Pilot Lines Gp
445-1369 Valve Wiring Gp
377-8016 Chassis Wiring Gp
344-0841 Film Gp
444-9174 FilmLocation for the 344-0841 Film Gp
Table 2
344-0841 Film Gp
Item Qty Pt No Part Name
(1) 1 250-8054 Film (Hammer)
(2) 1 260-6941 Film (Operator Controls)
Illustration 3 g02365059
(1) 250-8054 Film (Hammer)
(2) 260-6941 Film (Controls) Calibration
Set the machine tool control system.
Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Process for setting Up the Work Tool"Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Process for setting Up the Work Tool"Calibrate the machine electronic control system.
Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Work Tool Parameter - Program"Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Control (Thumb Wheel) - Calibrate"Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Valve #1" (Includes entering PHMV slopes) (Leave attachment ball valves on stick closed.)Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Solenoid Valve (Proportional Reducing) - Calibrate - Variable Relief Valves" (Leave attachment ball valves on stick closed. Requires two-way tool selected.)Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Solenoid Valve (Proportional Reducing) - Calibrate - Main Pump Flow Limit" (Requires flow box.)Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Solenoid Valve (PHMV) - Calibrate - Attachment Valve PHMV Extend"Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Solenoid Valve (PHMV) - Calibrate - Attachment Valve PHMV Retract" (Requires two-way tool selected.)Set tool flows and pressures.
Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Process for Setting Up the Work Tool"Reference: Excavator Tool Control System, KENR9616, "Testing and Adjusting Section", "Work Tool - Select"Set the proper operating and/or relief pressures and the proper flows for the tool that is attached to the machine. Refer to the Operation and Maintenance Manual of the specific work tool installed.Principles of Operation
Reference: Excavator Tool Control System, KENR9616, "Systems Operation Section", "General Information"Serial Number Identification 444-9174 Film
Caterpillar Work Tools hydraulic kits are identified with serial numbers. The serial number is printed on a film group (1). This film group should be placed on the right-hand window inside the cab.
Illustration 4 g01742203
(1) 444-9174 Film
Illustration 5 g01743196