LINK AS-TRACK 2349672 - Caterpillar

Illustration 1 g00485643
(A) Distance needed to increase in order to achieve the correct preload on the carrier bearings. ... 0.18 0.05 mm (0.007 0.002 inch) (1) Torque for four bolts ... 875 80 N m (645 59 lb ft) (2) Torque for 24 locknuts ... 360 14 N m (265 10 lb ft)Note: Make a check of the torque of each locknut (2) by hand.
Illustration 2 g00732619
(3) Lubricate the bore lightly with the lubricant that is being sealed.
Illustration 3 g00732629
(4) Torque for eight nuts ... 393 14 N m (290 10 lb ft)
Illustration 4 g00732624
(5) 9M-5874 Shim Pack Assembled thickness of shims ... 3.30 mm (0.130 inch) Thickness of one shim ... 0.08 mm (0.003 inch) Thickness of one shim ... 0.13 mm (0.005 inch) (7) Dowel Quantity ... 2 Distance from dowel (7) to spring housing (6) ... 31.8 0.5 mm (1.25 0.02 inch) (8) 7D-4893 Spring Quantity ... 12 Test length ... 68.3 mm (2.69 inch) Test force ... 425 21 N (95.7 4.8 lb) Free length after test ... 75.7 mm (2.98 inch) Outside diameter ... 23.80 mm (0.937 inch) (9) 8X-1061 Shim Thickness ... 0.178 0.013 mm (0.0070 0.0005 inch) Inside diameter ... 294.5 mm (11.59 inch) Outside diameter ... 343.0 mm (13.50 inch) (10) 8X-1062 Shim Thickness ... 0.127 0.013 mm (0.0050 0.0005 inch) Inside diameter ... 294.5 mm (11.59 inch) Outside diameter ... 343.0 mm (13.50 inch) (11) Torque for six bolts ... 135 20 N m (100 15 lb ft) (12) Lubricate the sealing lip lightly with the lubricant that is being sealed.