LINK AS-TRACK 2389954 - Caterpillar

Loosen bolts (1). Reposition plate assembly (2) out of the way.
Illustration 2 g01203508
Disconnect hose (3). Loosen clamp (5). Remove dust ejector (4) .
Illustration 3 g01203509
Loosen bolt (6) and remove precleaner (7) .
Illustration 4 g01203511
Disconnect harness assemblies (8). Remove bolts (9). Reposition primary fuel filter (10) out of the way. Remove bolt (11) .
Illustration 5 g01203512
Remove bolts (12). Reposition secondary fuel filter (13) out of the way.
Illustration 6 g01203513
Remove bolts (14). Remove plates (15). Repeat this step for the opposite side of the machine.
Illustration 7 g01203514
Attach Tooling (A) and a suitable lifting device to hood (16). Remove hood (16). The weight of hood (16) is approximately 91 kg (200 lb).Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     3    
Illustration 8 g01203514
Use Tooling (A) and a suitable lifting device to install hood (16). The weight of hood (16) is approximately 91 kg (200 lb).
Illustration 9 g01203513
Install plates (15) and bolts (14). Repeat this step for the opposite side of the machine.
Illustration 10 g01203512
Position secondary fuel filter (13) and install bolts (12) .
Illustration 11 g01203511
Install bolt (11). Position primary fuel filter (10) and install bolts (9). Connect harness assemblies (8) .
Illustration 12 g01203509
Install precleaner (7) and install bolt (6) .
Illustration 13 g01203508
Install dust ejector (4). Tighten clamp (5) and connect hose (3) .
Illustration 14 g01203506
Position plate assembly (2) and tighten bolts (1) .End By:
Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Install the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".