LINK GP-STEERING 2450905 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01313033
Open left side engine door (1). Remove cover assembly (2) .
Illustration 2 g01313594
Disconnect hose (3) .
Illustration 3 g01222496
Remove bolts (7) from water pump (6) .
Remove front cover (9). Remove gasket (8) from front cover (9) .
Tap water pump (6) with a soft hammer in order to loosen water pump (6). Remove water pump (6) from front housing (4) .
Remove gasket (5) from water pump (6) .