LINK-TRACK 2482307 - Caterpillar

Identification of the serviceable components of the 134-0467 Pump Group.
Identification of the serviceable components of the 107-1228 Pump Group.HEUI Pump Service Tips
When servicing the pump inspect the pump drive gear (8). If the pump drive gear (8) is loose or damaged, the pump group should be replaced and the engine oil filter should be changed.
Item 4 (Plug) in the charts and illustrations is the only plug of the pump group that is serviceable. The other plugs of the pump group are not serviceable. Leakage from any other plugs other than item 4 could be an indication of internal damage. If there is leakage from plugs other than item 4 the pump should be replaced.
Inspect the O-ring seal (9). If it is worn or damaged replace it.
When the pump drive gear (8) is installed torque the drive gear bolt (3) to 110 14 N m (80 10 lb ft)
If any of the following fittings have been removed, tighten the fittings to the following torques: * Oil pump inlet: 26 3 N m (19 2 lb ft)* Oil pump outlet: 23 2 N m (17 .5 lb ft)* Fuel pump inlet: 17.5 2 N m (13 1.5 lb ft)* Fuel pump outlet: 17.5 2 N m (13 1.5 lb ft)
Tighten HEUI pump mounting bolts to 28 14 N M (80 10 lb ft).