2487838 LINK & BEARING AS Caterpillar parts
311D LRR, 311F LRR, 312D2 GC, 312E, 312E L, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 329E
Rating:
Alternative (cross code) number:
CA2487838
248-7838
2487838
CA2487838
248-7838
2487838
Weight: 85 pounds 38 kg.
EXCAVATOR,
Compatible equipment models: 2487838:
Number on catalog scheme:
10
For full view, you need register
Information:
Caterpillar: Confidential Yellow
PARTS STOCK ACTION ONLY - INSPECT ALL 2N2384 AND 2N2385 FUEL SHUTOFF SOLENOIDS IN PARTS STOCK - MAILED US WORLDWIDE EXCEPT BRA ZIL
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
INSPECT ALL 2N2384 AND 2N2385 FUEL SHUTOFF SOLENOIDS IN PARTS STOCK, 1259, PI7181 U-105 A-50 AU-81 C-103 E-66 O-77 parts stock action only Termination Date
January 31, 1987
Problem
On some 2N2384 and 2N2385 Fuel Shutoff Solenoids the plungers have too much travel and cause the pull coil to energize again.
Action Required
Use the information which follows and a 6V3030, 6V7070 or 6V7700 Digital Multi-Meter to check the 2N2384 and 2N2385 Solenoids. 1. Connect the meter to the "R" and the unmarked terminals. (Do not connect to the "g" terminal.) Set the meter on the 200 Ohm range. 2. Check the meter reading with the plunger in the extended position. It should be: 2N2384 - less than 1 Ohm 2N2385 - less than 2 Ohms. 3. Push the plunger completely into the solenoid, and hold it there. The meter should show: 2N2384 - over 10 Ohms 2N2385 - over 40 Ohms. If the measured resistance in Step 3 is less than the specification, the solenoid is defective and should be removed from parts stock. WARRANTY ALLOWANCES Submit one claim for all 2N2384 and 2N2385 Solenoids in parts stock that are found to be defective.
Parts Disposition
U.S. and Canadian Dealers Return all 2N2384 and 2N2385 Solenoids that are removed from parts stock and a copy of the claim to: Caterpillar Inc. Attn: Supplier Recovery Supervisor Warehouse #4 Docks 5 thru 9 8201 N. University Peoria, IL 61615 All Other Dealers Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
PARTS STOCK ACTION ONLY - INSPECT ALL 2N2384 AND 2N2385 FUEL SHUTOFF SOLENOIDS IN PARTS STOCK - MAILED US WORLDWIDE EXCEPT BRA ZIL
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
INSPECT ALL 2N2384 AND 2N2385 FUEL SHUTOFF SOLENOIDS IN PARTS STOCK, 1259, PI7181 U-105 A-50 AU-81 C-103 E-66 O-77 parts stock action only Termination Date
January 31, 1987
Problem
On some 2N2384 and 2N2385 Fuel Shutoff Solenoids the plungers have too much travel and cause the pull coil to energize again.
Action Required
Use the information which follows and a 6V3030, 6V7070 or 6V7700 Digital Multi-Meter to check the 2N2384 and 2N2385 Solenoids. 1. Connect the meter to the "R" and the unmarked terminals. (Do not connect to the "g" terminal.) Set the meter on the 200 Ohm range. 2. Check the meter reading with the plunger in the extended position. It should be: 2N2384 - less than 1 Ohm 2N2385 - less than 2 Ohms. 3. Push the plunger completely into the solenoid, and hold it there. The meter should show: 2N2384 - over 10 Ohms 2N2385 - over 40 Ohms. If the measured resistance in Step 3 is less than the specification, the solenoid is defective and should be removed from parts stock. WARRANTY ALLOWANCES Submit one claim for all 2N2384 and 2N2385 Solenoids in parts stock that are found to be defective.
Parts Disposition
U.S. and Canadian Dealers Return all 2N2384 and 2N2385 Solenoids that are removed from parts stock and a copy of the claim to: Caterpillar Inc. Attn: Supplier Recovery Supervisor Warehouse #4 Docks 5 thru 9 8201 N. University Peoria, IL 61615 All Other Dealers Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar parts catalog:
Parts link Caterpillar catalog:
311D LRR, 312B, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312E, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR
323E L, 329D, 329D L, 329E, OEMS
312B, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
216, 216B, 216B3, 226B, 226B3, 228, 236, 236B, 236B3, 242B, 242B3, 246C, 246D, 247, 247B, 247B3, 248, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 262D, 267, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, ...
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
311C, 312B L, 312C, 312C L, 313B, 314C, 320C, 322B, 322B L, 322C, 322C FM, 323D L, 325C, 325D, 330B L, 330C, 330C L
311C, 312C, 312C L, 314C, 320C, 322C, 323D L, 325C, 325D, 330C, 330C L
311C, 312C, 312C L, 314C, 320C, 322B, 322C, 323D L, 325C, 325D, 330B L, 330C, 330C L
2542996
LINK & BEARING AS
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D L
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D L
2417140
LINK & BEARING AS
324D, 324E, 324E LN, 325D L, 326D L, 328D LCR, 329D, 329D L, 329E, 330D L, 336D, 336D L, 336D2, 336E, 336E H, 336E LH, 340D L, 340D2 L
324D, 324E, 324E LN, 325D L, 326D L, 328D LCR, 329D, 329D L, 329E, 330D L, 336D, 336D L, 336D2, 336E, 336E H, 336E LH, 340D L, 340D2 L
2481842
LINK & BEARING AS
320E, 323D L, 325D L, 329D, 329D L, 329E
320E, 323D L, 325D L, 329D, 329D L, 329E
2792739
LINK AS
329E
329E
2487824
LINK & BEARING AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312E, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 320E, 320E LN, 324E, 324E LN, 329E, 329E LN
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312E, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 320E, 320E LN, 324E, 324E LN, 329E, 329E LN
2824503
LINK & BEARING AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 313D2, 314D CR, 314D LCR, 314E CR, 314E LCR, 320E L, 320E LN, 324E L, 324E LN, 329E L, 329E LN
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 313D2, 314D CR, 314D LCR, 314E CR, 314E LCR, 320E L, 320E LN, 324E L, 324E LN, 329E L, 329E LN
2803162
LINK AS
M313D
M313D
2893850
LINK & BEARING AS
M318D MH, M322D MH
M318D MH, M322D MH
2893840
LINK AS-BEARING
M318D MH, M322D MH
M318D MH, M322D MH
1187303
LINK-TRACK MASTER
312D, 325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L, OEMS, TK1051
312D, 325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L, OEMS, TK1051
1290T, 1390, 2491, 2590, 312D, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, ...
3335629
LINK-TRACK MASTER
305.5E, 306, 306E
305.5E, 306, 306E
3335628
LINK-TRACK
305.5E, 306, 306E
305.5E, 306, 306E
3335626
LINK-TRACK MASTER
305.5E, 306, 306E
305.5E, 306, 306E
3335625
LINK-TRACK
305.5E, 306, 306E
305.5E, 306, 306E