2504245 LINK-TRACK MASTER Caterpillar parts
D9R, D9T
Rating:
Alternative (cross code) number:
CA2504245
250-4245
2504245
CA2504245
250-4245
2504245
Weight: 20 pounds 9 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replacement part for Rotary 868 for Oregon 07-403 1/4" In-Line Fuel Shut Off Valve 2PCS lawnPart#260709
Generic NOTE - Package included: 1 PC ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Color: Silver || Compatible Model: 48568 || 48568 / 07-403 || Model: for Scag 48568 for Oregon 07-403 Rotary 868
Generic NOTE - Package included: 1 PC ONLY. Please check all carefully (photos and model) and make sure it will compatible with your original one. || Color: Silver || Compatible Model: 48568 || 48568 / 07-403 || Model: for Scag 48568 for Oregon 07-403 Rotary 868
Sunday Red Frame With Hearts Left Arrow Single Sided 18x24 in. Yard Road Sign w/Stand
Work House Signs Large 18"x24" Size for Maximum Visibility – Get your message seen from a distance with this generously sized yard sign, ideal for drive-by traffic and foot visibility. || UV-Resistant for Long-Term Use – Advanced UV protection prevents sun damage, ensuring bold colors and clear messaging even after months of outdoor exposure. || Easy to Install & Reuse – Quick setup with wire stakes included, plus durable construction allows for multiple uses across seasons and events. || Versatile for Home or Business – Great for political campaigns, garage sales, real estate, business promotions, yard décor, event announcements, or custom messages
Work House Signs Large 18"x24" Size for Maximum Visibility – Get your message seen from a distance with this generously sized yard sign, ideal for drive-by traffic and foot visibility. || UV-Resistant for Long-Term Use – Advanced UV protection prevents sun damage, ensuring bold colors and clear messaging even after months of outdoor exposure. || Easy to Install & Reuse – Quick setup with wire stakes included, plus durable construction allows for multiple uses across seasons and events. || Versatile for Home or Business – Great for political campaigns, garage sales, real estate, business promotions, yard décor, event announcements, or custom messages
#US Replacement Part for Carburetor Overhaul kit Fits for McCulloch 3216 3516 225 3505 Carb Fits for ZAMA RB-39 gotepart#2504245
Generic NOTE - Package included: 1 Set ONLY. Part Number: rb39 || Model: Fits for ZAMA C1Q-H14 -H19 -H27 -H32 -M27 -M28 -M33 -W2A Carburetor || Compatible Model: 3214 3216 3505 3516 225 3805 3818.
Generic NOTE - Package included: 1 Set ONLY. Part Number: rb39 || Model: Fits for ZAMA C1Q-H14 -H19 -H27 -H32 -M27 -M28 -M33 -W2A Carburetor || Compatible Model: 3214 3216 3505 3516 225 3805 3818.
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
M8 by 100 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the water pump is clean and free from wear or damage. If necessary, replace the water pump.
Illustration 1 g01269391
Typical example
If necessary, install cover (6) to water pump (3). Follow Steps 2.a through 2.d in order to install the cover.
Clean the mating surface of cover (6).
Position a new joint (5) onto water pump (3).
Install cover (6) to water pump (3).
Install bolts (7) to cover (6). Tighten the bolts finger tight.
Clean the mating surface of front cover (1).
Illustration 2 g01269392
Install Tooling (A) in Position (X).
Use Tooling (A) in order to align a new joint (2) to front cover (1). Install the joint to the front cover.
Align water pump (3) with Tooling (A). Install the water pump to front cover (1). Note: Ensure that the gear of the water pump and the gear of the fuel injection pump mesh.
Install bolts (4). Refer to Illustration 1. Tighten the bolts finger tight. Note: Ensure that bolts of different lengths are installed in the correct positions.
Remove Tooling (A) and install remaining bolts (4) finger tight.
Illustration 3 g01269393
Tightening sequence for the water pump
Tighten bolts (4) and bolts (7) to a torque of 22 N m (16 lb ft). Tighten the bolts in the sequence that is shown in Illustration 3.
Install the hose to the water pump inlet. Tighten the hose clamps.
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. End By:
Install the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
M8 by 100 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the water pump is clean and free from wear or damage. If necessary, replace the water pump.
Illustration 1 g01269391
Typical example
If necessary, install cover (6) to water pump (3). Follow Steps 2.a through 2.d in order to install the cover.
Clean the mating surface of cover (6).
Position a new joint (5) onto water pump (3).
Install cover (6) to water pump (3).
Install bolts (7) to cover (6). Tighten the bolts finger tight.
Clean the mating surface of front cover (1).
Illustration 2 g01269392
Install Tooling (A) in Position (X).
Use Tooling (A) in order to align a new joint (2) to front cover (1). Install the joint to the front cover.
Align water pump (3) with Tooling (A). Install the water pump to front cover (1). Note: Ensure that the gear of the water pump and the gear of the fuel injection pump mesh.
Install bolts (4). Refer to Illustration 1. Tighten the bolts finger tight. Note: Ensure that bolts of different lengths are installed in the correct positions.
Remove Tooling (A) and install remaining bolts (4) finger tight.
Illustration 3 g01269393
Tightening sequence for the water pump
Tighten bolts (4) and bolts (7) to a torque of 22 N m (16 lb ft). Tighten the bolts in the sequence that is shown in Illustration 3.
Install the hose to the water pump inlet. Tighten the hose clamps.
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure. End By:
Install the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Caterpillar parts catalog:
Parts link Caterpillar catalog:
6Y1130
LINK AS-TRACK
D9N, D9R
D9N, D9R
1995531
LINK AS-TRACK
D9R, D9T
D9R, D9T
1995525
LINK AS-TRACK
D9R, D9T
D9R, D9T
7T2276
LINK-TRACK-LH
D9N, D9R, D9T
D9N, D9R, D9T
1241444
LINK
D9R
D9R
2461040
LINK AS
D9R, D9T
D9R, D9T
2145159
LINK
D9R
D9R
2461042
LINK AS
D9R, D9T
D9R, D9T
2611175
LINK AS-WIPER
D10T, D11T, D8T, D9T
D10T, D11T, D8T, D9T
2611176
LINK AS
D10T, D11T, D8T, D9T
D10T, D11T, D8T, D9T
3355188
LINK AS
D9R
D9R
3905421
LINK AS
D9T
D9T
7T2276
LINK-TRACK-LH
D9N, D9R, D9T
D9N, D9R, D9T
7T2278
LINK-MASTER-LH
D9N, D9R
D9N, D9R
7T2277
LINK-MASTER-RH
D9N, D9R
D9N, D9R
7T2275
LINK-TRACK-RH
D9N, D9R, D9T
D9N, D9R, D9T
7T2280
LINK-MASTER-LH
D9N, D9R
D9N, D9R
9W2744
LINK-TRACK-LH
D9N, D9R, D9T
D9N, D9R, D9T
7T4761
LINK AS
D10N, D10R, D11N, D11R, D9L, D9N, D9R
D10N, D10R, D11N, D11R, D9L, D9N, D9R
2504244
LINK-TRACK MASTER
D9R, D9T
D9R, D9T
2504243
LINK-TRACK MASTER
D9R, D9T
D9R, D9T
2504248
LINK-TRACK MASTER
D9R, D9T
D9R, D9T
2504247
LINK-TRACK MASTER
D9R, D9T
D9R, D9T
2504246
LINK-TRACK MASTER
D9R, D9T
D9R, D9T