LINK GP-STEERING 2746817 - Caterpillar

Disconnect harness assembly (5).
Illustration 5 g03675967
Remove bolts (6) and position pilot valve (7) out of the way.
Illustration 6 g03675979
Remove bolts (9) and position governor control (8) out of the way of the support assembly.
Illustration 7 g03676058
Illustration 8 g03681044
Disconnect harness assembly (10). Disconnect harness assemblies (11). Remove bolt (13) and disconnect ground cable (12).
Illustration 9 g03675943
Disconnect hose assembly (14) and hose assembly (15). Disconnect hose assembly (16) and hose assembly (17).
Illustration 10 g03675961
Mark all hose assemblies for installation purposes. Disconnect eight hose assemblies (18).
Illustration 11 g03675622
Remove bolts (19). Lean cover (21) forward enough to disconnect harness assembly (20) from hour meter (22). Remove cover (21).
Illustration 12 g03682641
Slide cable (25) off arm (24). Remove the bolt that secures clip (23).
Illustration 13 g03676071
Illustration 14 g03675949
Harness assembly (29) will remain with support assembly (26) when support assembly (26) is removed.
Attach Tooling (A) and a suitable lifting device to support assembly (26). The weight of support assembly (26) is approximately 34 kg (75 lb).
Cut all cable straps (28) that secure harness assembly (26) to the cab floor plate. Note: Make sure that you remove all bolts (28) that are located on the rear side of support assembly (26).
Remove all bolts (27) that secure support assembly (26) to the cab floor plate. Remove support assembly (26).
Illustration 15 g03676154
Remove bolt (32) and clamp (30). Disconnect hose assembly (31) and hose assembly (33).
Illustration 16 g03676195
Disconnect hose (34) and hose (35).
Illustration 17 g03682870
Front view of heating and air conditioning unit (36).
Illustration 18 g03682878
Rear view of heating and air conditioning unit (36).
Remove bolt (37), not shown. Remove bolts (38). Remove bolts (39).
Remove heating and air conditioning unit (36).