LINK & BEARING AS-BUCKET 2785950 - Caterpillar

Illustration 1 g02174519
Typical example (1) Outlet manifold (2) Left stabilizer control valve (3) Extendable stick control valve (4) Bucket control valve (5) Swing control valve (6) Stick control valve (7) Boom control valve (8) Auxiliary control valve (9) Right stabilizer control valve (10) Pilot on/off solenoid valve (11) Inlet manifold (12) "B" ports (13) "A" portsThe ports for the valves face the rear of the machine.The bank valves (backhoe control) are located below the floorplate at the rear of the operator station. The valves are mounted on the rear frame.The machine can be equipped with a seven bank or eight bank valves.Standard equipment includes the following items: oil outlet cover (1), left stabilizer control valve (2), bucket control valve (4), swing control valve (5), stick control valve (6), boom control valve (7), right stabilizer control valve (9) and inlet cover (11). Inlet cover (11) also contains the pilot on/off solenoid valve (10) . An optional extendable stick is available. If this option is installed on the machine, extendable stick control valve (3) is also a part of the bank valves (backhoe control). Various optional auxiliary circuits are available. If one of these options is installed on the machine, auxiliary control valve (8) is also a part of the bank valves (backhoe control). All the control valves are connected to the joysticks with pilot lines. All sections of the control valve are the type that has a closed centered position.