LINK-PIN END 2P9654 - Caterpillar

Agricultural Tractor:
55 (S/N: 7DM1-UP)
Combine:
Lexion 450 (S/N: 5531-UP)
Lexion 460 (S/N: 6541-UP)
Lexion 460 R (S/N: 6651-UP)
Track-Type Tractor:
30-30 (S/N: 9XW1-UP)
DEUCE (S/N: 7RR1-UP)
Excavator:
322C (S/N: DAA1-UP; FED1-UP; M2H1-UP; HEK1-UP; BYL1-UP; C3R1-UP; EMR1-UP; LAR1-UP; MAR1-UP)
325C (S/N: CRB1-UP; JLC1-UP; S2C1-UP; BTD1-UP; JLD1-UP; BFE1-UP; DTF1-UP; AMH1-UP; CSJ1-UP; M2K1-UP; BMM1-UP; S3M1-UP; Y4P1-UP; BKW1-UP)
M325C (S/N: XJA1-UP; PAN1-UP)
Wheel Harvester:
550B (S/N: SAW1-UP)
560B (S/N: TRA1-UP)
570B (S/N: CKG1-UP)
580B (S/N: CLT1-UP)
Integrated Toolcarrier:
IT38GSeries II (S/N: JAN1-UP; CSX1-UP)
IT62GSeries II (S/N: AYA1-UP)
IT62G (S/N: AKP1-UP; 6PS1-UP)
Motor Grader:
120H (S/N: CAF1-UP; ALZ1-UP; 1241-UP)
135H (S/N: CBC1-UP; AMX1-UP)
Pipelayer:
561N (S/N: CPH1-UP)
Track-Type Loader:
953C (S/N: BBX1-UP)
963C (S/N: BBD1-UP)
Track-Type Tractor:
D5N (S/N: AKD1-UP; AGG1-UP; CFH1-UP; CKT1-UP)
D6N (S/N: CBF1-UP; CCG1-UP; ALH1-UP; CCK1-UP; CBL1-UP; AKM1-UP; ALR1-UP; CCS1-UP; ALY1-UP)
Wheel Loader:
938GSeries II (S/N: RTB1-UP; CRD1-UP; PHN1-UP; B9Y1-UP)
950FSeries II (S/N: 5SK1-UP)
950F (S/N: 7ZF1-UP)
950GSeries II (S/N: BAA1-UP; AYB1-UP; AYD1-UP; AYL1-UP; AXR1-UP; AYS1-UP; AXX1-UP)
950G (S/N: 2JS1-UP; 4BS1-UP; 6NS1-UP; 3JW1-UP; 5FW1-UP; 5MW1-UP; 8JW1-UP)
960F (S/N: 9ZJ1-UP)
962GSeries II (S/N: BAB1-UP; BAC1-UP; BAD1-UP; AYE1-UP; AYG1-UP; AXS1-UP; AXY1-UP)
962G (S/N: 3BS1-UP; 5AS1-UP; 5RS1-UP; 4PW1-UP; 6EW1-UP; 6HW1-UP; 7BW1-UP)
Use care when servicing HEUI pumps in Table 1. When the fuel line fittings and the fittings for the oil line are assembled to the pump, an excessive torque that is applied to the fittings can damage the threads of the pump ports. If the pump requires service, refer to Illustrations 1, 2, 3, 4 and 5.When you service the pump drive gear, inspect the pump drive gear. If the pump drive gear is loose or the pump drive gear is damaged, the pump should be replaced and the engine oil filter should be changed.Plug (5), plug (14) and plug (30) are the only plugs that are serviceable. The other plugs of the pump group are not serviceable. Check the other plugs of the pump group for leaks. Replace the pump if any of the other plugs on the pump group are leaking. Inspect the O-ring seal. If the O-ring seal is worn or if the O-ring seal is damaged, replace the O-ring seal.
Table 1
Unit Injector Pump     Base Pump Group     Reman    
162-9608     162-9610     N/A    
107-1228     109-4327     0R-4969    
134-0467     135-5459     0R-9439    
186-3410     186-3412     N/A    162-9608 Unit Injector Hydraulic Pump Gp
Illustration 1 g01224288
(1) Unit Injector Hydraulic Pump (2) Tighten the bolt that holds the gear to the following torque. ... 108.8 13.6 N m (80 10 lb ft) (3) The high pressure relief valve is set to the following pressure. ... 32.2 1.7 MPa (4670 247 psi)
Illustration 2 g01224291
(4) Tighten the fitting for the oil inlet port to the following torque. ... 71.5 7.5 N m (52.7 5.5 lb ft) (5) Tighten the plug to the following torque. ... 6.0 0.7 N m (53 6 lb in) (6) Tighten the plug to the following torque. ... 10.75 1.25 N m (95 11 lb in) (7) Tighten the valve to the following torque. ... 50 5 N m (37 4 lb ft) (8) Tighten the fitting for the oil outlet port to the following