LINK AS (RH) 2Q3456 - Caterpillar

Diesel engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well-ventilated area and, if in an enclosed area, vent the exhaust to the outside.
Mounting The Machine
* Mount the machine only where steps and/or handholds are provided.* Inspect, and when necessary, clean and have repairs made to steps and handholds before mounting. * Face the machine when mounting.* Maintain a three-point contact (two feet and one hand or one foot and two hands contact) with the steps and handholds.Machine Walk-Around Inspection
For maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for such items as loose bolts, trash build up, oil or coolant leaks, broken or worn parts. Inspect the condition of the equipment and the hydraulic components.Refer to Walk-Around Inspection in the Maintenance Section for detailed walk-around inspection information.Machine Pre-Start Checks
Check all of the oil, coolant and fuel levels.Refer to the Every 10 Service Hours or Daily in the Maintenance Section for more detailed information.Seat and Seat Belt Checks
Adjust the seat at the beginning of each shift or when changing operators.Adjust the seat to allow full travel of the pedals when the operator is seated against the seat back.Inspect the belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight.Fasten the seat belt before starting the engine.