LINK & BEARING AS 3475077 - Caterpillar

Image3.1.1
At the machine:
2. Replace the PLE601 Network Manager as outlined in REHS8850, section ?Network Manager Replacement?.
3. Connect to the asset using Cat ET (version 2014C or newer) and Ethernet Adapter (Part Number: 425-6889), and flash all Telematics ECM's using the part numbers in Image 3.1.1. For additional information on how to flash Product Link devices, refer to REHS8850, section "Flash the PLE641 or PLE631 Product Link System Using Winflash".
Please be aware:
-This new 2017B flash file introduces a memory check to identify and resolve any possible memory corruptions. As a result, successful flashes may now take up to 35 minutes.
-In rare instances, if this check of current memory discovers an unrecoverable memory error it will proactively wipe the PLE601 memory. This will result in a "blank" PLE601 that will need to have all settings/configurations, configuration files, and flash files set/installed again. If a technician finds a flash taking longer than 35 minutes, technician should power cycle the PLE601, reconnect to Cat ET/Winflash, and attempt the flash again. Be aware that this will only occur if the PLE601 error is unfixable/unrecoverable and failing soon regardless of the 2017B flash. This flash file does not introduce any such failures.
4. Perform communication check to ensure that process has been successful.
5. If the device is not communicating, refer to UENR5823 to troubleshoot a PLE641/PLE631. Please complete