LINK AS-TRACK 3537387 - Caterpillar

a) remove engine and torque dividerb) separation of torque divider from engine 1. Remove oil scraper (2) from flywheel housing.2. Remove eight of the bolts (1) from flywheel. Fasten a hoist to flywheel with tool (A). Remove the last bolt and remove the flywheel. Weight of flywheel is 95 lb. (43 kg).Install Flywheel
1. Put the flywheel in position on engine with tooling (A). One hole in the flywheel and crankshaft has a mark by it. These holes must be in alignment when the flywheel is installed.2. Install the nine bolts that hold the flywheel to crankshaft. Tighten the bolts to a torque of 375 25 lb.ft. (508.4 33.9 N m).3. Install oil scraper.end by:a) connection of torque divider to engineb) install engine and torque divider