LINK AS 3594738 - Caterpillar

HOLD (2) - The lever will return to the HOLD position when you release the lever from the RAISE position or from the LOWER position. The blade will remain in the selected position.
TIP FORWARD (3) - Move the lever to the right. The top of the blade will tip forward. The lever will return to the HOLD position when you release the lever. The blade will remain tipped forward. Lift and Tilt Control (22)
Lift Control
Illustration 24 g00784240
814F Wheel Dozer (B-B) Rear view of control levers. (A-A) Right side view of control levers.
Illustration 25 g00879283
815F Soil Compactor and 816F Landfill Compactor (B-B) Rear view of control levers. (A-A) Right side view of control levers.
Float (1) - Push the joystick forward into the detent. The attachment will follow along the contour of the ground. The joystick will remain in the FLOAT position until the joystick is pulled out of the detent. The joystick will return to the HOLD position when the joystick is released.
Never use the FLOAT position to lower a loaded bucket.Machine damage can result from a bucket that falls too fast.
Lower (2) - Push the joystick forward in order to lower the attachment. The joystick will return to the HOLD position when the joystick is released.
Hold (3) - The joystick will return to the HOLD position when the joystick is released from the RAISE position or from the LOWER position. The attachment will remain in the selected position.
Raise (4) - Pull the joystick backward in order to raise the attachment. The joystick will return to the HOLD position when the joystick is released. The joystick is detented in the fully raised position. The joystick will stay in the detent and the attachment will continue to rise until the attachment reaches the lift kickout height. Then, the joystick will return to the HOLD position.Tilt Control
Illustration 26 g00784632
814F Wheel Dozer
Illustration 27 g00879291
815F Soil Compactor
TILT LEFT (1) - Move the lever to the left. The blade will tilt to the left. The lever will return to the HOLD position when you release the lever. The blade will remain tilted to the left.
HOLD (2) - The lever will return to the HOLD position when you release the lever from the RAISE position or from the LOWER position. The blade will remain in the selected position.
TILT RIGHT (3) - Move the lever to the right. The blade will tilt to the right. The lever will return to the HOLD position when you release the lever. The blade will remain tilted to the right. Upshift/Downshift Switch (23)
Illustration 28 g00783933
815F Soil Compactor and the 816F Landfill CompactorThe transmission can be manually shifted into second speed or manually shifted into first speed. This is only possible when the speed control lever has been rotated into first speed or second speed. Press the switch that is located on the lift control lever in order to manually shift the transmission.