LINK & BEARING AS 3715529 - Caterpillar

3715529 LINK & BEARING AS Caterpillar parts 336E L, 336E LH, 336F L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3715529
371-5529
3715529

Weight: 354 pounds 160 kg.

Buy LINK & BEARING AS 3715529 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3715529:

EXCAVATOR 336E L 336E LH 336F L Caterpillar

Number on catalog scheme: 5

Caterpillar 3715529 Parts scheme LINK & BEARING AS

For full view, you need register

Information:

Personal injury or death can result if two persons are not used in the following procedure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Make measurement of lining wear at least once per year, in particular, however, in case of modified braking behavior, like:
Brake noises
Reduced braking power
Changed deceleration
Changed brake oil level
Changed braking pressureWear measurement
Illustration 1 g02825676
(1) Plug
Illustration 2 g02825756
() Dimension of Measure the wear on both output sides.
Remove screw plug, actuate brake, and determine Dimension (A). Use a feeler gauge and refer to Figure 1 and 2. Dimension (A) corresponds with thickness of inner clutch disc on the piston side.Note: If Dimension (A) is less than 4 mm (0.16 inch), the lined discs on both output sides must be replaced.
Install the level plug with a new O-ring. Torque the plug to 50 N m (36.88 lb ft).