3K9794 LINK ASSEM. Caterpillar parts
930
Rating:
Alternative (cross code) number:
CA3K9794
3K-9794
3K9794
CA3K9794
3K-9794
3K9794
Weight: 23 pounds 10 kg.
WHEEL LOADER,
Compatible equipment models: 3K9794:
Number on catalog scheme:
35
For full view, you need register
Information:
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
(2-Rework Procedure)
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - NEW TAILGATE PINS AND DECALS NEED TO BE INSTALLED ON CERTAIN D400E II EJECTOR TRUCKS
MODELS INVOLVED - D400E II EJECTOR TRUCKS
Dear Caterpillar Product Owner:
New tailgate locking pins, tailgate decals, and lifting/tiedown films need to be installed on the products listed below. The locking pins are a simpler design for ease of use. The decals and films are to the latest revision levels. Earlier decals and films may contain insufficient or incorrect information.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated December 8, 2000 when scheduling this service. You will not be charged for the service performed.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to December 8, 2000 Service Letter
REWORK PROCEDURE
Procedure To Install Tailgate Locking Pins,
New Tailgate Decal And New Lifting Instruction
Film On D400E Series II Ejector Machines
Parts List
Part Number Description Quantity
194-0862 Plate As-Bracket 2
192-4624 Pin As 2
3R8535 Pin-Lock 2
177-0524 Plate-Warning 2
033-7291 Rivet-Pop 8
150-9499 Film 1
Machine Preparation:
Park the machine on level ground.
Lower the body tailgate to prevent accidental lowering while personnel are working in the tailgate area. Refer to the illustration and procedure below to lower the tailgate.
A service switch (5) is provided in order to allow the operator to inch the ejector blade in a forward direction or a backward direction. The service switch has two positions. The service switch must first be pushed in. Turn the service switch in a clockwise direction in order to select service operation. Turn the switch in a counterclockwise direction in order to return to normal operation.
The ejector blade can be extended by using the eject button (1). The ejector blade can be retracted by using the retract button (2). Depress the button in order to move the ejector blade in the required direction. Release the button in order to stop the ejector blade.
Turn the service switch to the service operation (clockwise), then start the engine and push the eject button. Hold the button in until the ejector blade has reached the end of its travel and the tailgate has fully opened. Release the button.
Shut down the engine and turn the battery disconnect switch OFF.
Procedure:
Install Tailgate Locking Pins
Remove all traces of dirt, oil, grease and paint from the rear of the body, in the area shown in the illustration below, in preparation for welding.
Position one of the 194-0862 Brackets (item 19 in the illustration below) using the dimensions shown below. Position the bracket so that the anti-rotation tab for the pin is uppermost. Permanently attach the bracket to the body by fully welding in the 2 circular pockets.
Remove weld spatter, and dress welds flush to bracket surface. Re-finish paintwork as required.
Repeat steps 1 ?
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
(2-Rework Procedure)
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - NEW TAILGATE PINS AND DECALS NEED TO BE INSTALLED ON CERTAIN D400E II EJECTOR TRUCKS
MODELS INVOLVED - D400E II EJECTOR TRUCKS
Dear Caterpillar Product Owner:
New tailgate locking pins, tailgate decals, and lifting/tiedown films need to be installed on the products listed below. The locking pins are a simpler design for ease of use. The decals and films are to the latest revision levels. Earlier decals and films may contain insufficient or incorrect information.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated December 8, 2000 when scheduling this service. You will not be charged for the service performed.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to December 8, 2000 Service Letter
REWORK PROCEDURE
Procedure To Install Tailgate Locking Pins,
New Tailgate Decal And New Lifting Instruction
Film On D400E Series II Ejector Machines
Parts List
Part Number Description Quantity
194-0862 Plate As-Bracket 2
192-4624 Pin As 2
3R8535 Pin-Lock 2
177-0524 Plate-Warning 2
033-7291 Rivet-Pop 8
150-9499 Film 1
Machine Preparation:
Park the machine on level ground.
Lower the body tailgate to prevent accidental lowering while personnel are working in the tailgate area. Refer to the illustration and procedure below to lower the tailgate.
A service switch (5) is provided in order to allow the operator to inch the ejector blade in a forward direction or a backward direction. The service switch has two positions. The service switch must first be pushed in. Turn the service switch in a clockwise direction in order to select service operation. Turn the switch in a counterclockwise direction in order to return to normal operation.
The ejector blade can be extended by using the eject button (1). The ejector blade can be retracted by using the retract button (2). Depress the button in order to move the ejector blade in the required direction. Release the button in order to stop the ejector blade.
Turn the service switch to the service operation (clockwise), then start the engine and push the eject button. Hold the button in until the ejector blade has reached the end of its travel and the tailgate has fully opened. Release the button.
Shut down the engine and turn the battery disconnect switch OFF.
Procedure:
Install Tailgate Locking Pins
Remove all traces of dirt, oil, grease and paint from the rear of the body, in the area shown in the illustration below, in preparation for welding.
Position one of the 194-0862 Brackets (item 19 in the illustration below) using the dimensions shown below. Position the bracket so that the anti-rotation tab for the pin is uppermost. Permanently attach the bracket to the body by fully welding in the 2 circular pockets.
Remove weld spatter, and dress welds flush to bracket surface. Re-finish paintwork as required.
Repeat steps 1 ?
Caterpillar parts catalog:
Parts link Caterpillar catalog:
2Y4342
LINK (rear)
621B, 621R
621B, 621R
1U3635
LINK ASSEM.
633D
633D
3G9126
LINK
920, 930
920, 930
3G9618
LINK ASSEM.
641B
641B
3G8045
LINK ASSEM.
641B
641B
641B
8J2087
LINK
623
623
8J2088
LINK
623
623
3G4006
LINK
613B, D9R
613B, D9R