3P1114 LINK (master) (R.H.-Pin End) Caterpillar parts
955K, 955L, 963, D6C, D6D, D6E
Rating:
Alternative (cross code) number:
CA3P1114
3P-1114
3P1114
CA3P1114
3P-1114
3P1114
Weight: 7 pounds 3 kg.
TRACK LOADER, TRACK-TYPE TRACTOR,
Compatible equipment models: 3P1114:
For full view, you need register
Information:
Illustration 1 g03368533
Table 1
Specification for 346-5752 Valve Actuator Gp
Item Qty Part Specification Description
1 - - Use the following sequence for installing and adjusting the CAT brake:
1. Loosen the jam nut (1) until the lash adjustment screw can be rotated easily.
2. Insert the feeler gauge between the exhaust rocker arm and the CAT brake pin.
3. Turn the lash adjustment screw clockwise until there is a slight drag on the feeler gauge when pulled.
4. Set the lash to 0.7112 0.0500 mm (0.02800 0.00197 inch).
5. Hold the lash adjustment screw in place and tighten the jam nut to 15 3 N m (133 27 lb in).
6. Recheck the CAT brake lash settings.
Caterpillar parts catalog:
Parts link Caterpillar catalog:
955K, 955L, D6C, D6D, D6D SR
D6D, D6E, D6E SR, D6G SR
955K, 955L, D6C, D6D
216, 216B, 216B3, 226B, 226B3, 228, 236, 236B, 236B3, 242B, 242B3, 246C, 246D, 247, 247B, 247B3, 248, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 262D, 267, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, ...
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
561B, 561C, 955C, 977D, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6E SR, D7F, D7G
561B, 561C, 955C, 977D, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6E SR, D7F, D7G
D6C, D8H, D8K
955L
3P1087
LINK ASSEM.
D6C, D6D
D6C, D6D
6S8681
LINK (master-L.H.)
931, D3
931, D3
6S8683
LINK (L.H.)
931, D3
931, D3
9J1903
LINK ASSEM.
5S, 6A, 6S, D5B, D6D
5S, 6A, 6S, D5B, D6D
955K, 955L, 963, D6C, D6D, D6E
955K, 955L, 963, D6C, D6D, D6E
955K, 955L, 963, D6C, D6D, D6E