LINK AS-TRACK 4574775 - Caterpillar

Illustration 1 g00288159
The following steps are for installing the cylinder liner into the cylinder block.
Apply liquid soap on the cylinder block liner bore surfaces. Apply liquid soap on the rubber seals on the lower part of the cylinder liner.
Put the filler band completely in clean engine oil for a moment.
Install the filler band (3) in the groove under the liner flange without delay.
Install the liner in the bore immediately, before the filler band expands. (1) Bore in new liner ... 137.19 0.03 mm (5.401 0.001 inch) (2) Thickness of flange on liner ... 8.890 0.020 mm (0.3500 0.0008 inch)The minimum thickness of the part that can be used again is the following value. ... 8.870 mm (0.3492 inch) (3) Filler bandNote: Refer to Guideline For Reusable Parts, SEBF8049 and Pistons And Cylinder Liners, SEBF8068.