LINK & BEARING AS 4750944 - Caterpillar

Table 1
Effective Serial Numbers    
S/N:R1A01717-UP    
S/N:SLM00395-UP    
S/N:PAG00481-UP    
S/N:JTS00345-UP    
S/N:SBK01373-UP    
S/N:TTJ00355-UP    The new parts and other parts required for installation are listed in Table 2.
Table 2
Qty    New Parts    
2     0S-1571 Bolt    
2     3S-1546 Full Nut    
2     4F-8965 Bolt    
4     5P-8244 Hard Washer    
1     153-9963 Ring    
2     245-6848 Clamp As    Note: The 5M-2894 Hard Washers can be removed from the original 4W-0531 Retainer for reuse.Installation Procedure
Illustration 1 g03087118
(1) 0S-1588 Bolt (2) 4W-0530 Retaining Ring (3) 4W-0531 Retainer (4) 5M-2894 Hard Washer
Remove two bolts (1), two washers (4), and two retainers (3) from the original oil cooler elbow.
Remove retaining ring (2) from the original oil cooler tube.
Illustration 2 g03087117
(1) 0S-1571 Bolt (2) 3S-1546 Full Nut (3) 4F-8965 Bolt (4) 5P-8244 Hard Washer (5) 153-9963 Ring (6) 245-6848 Clamp As
Install ring (5 ) around the tube.
Install clamp assemblies (6) loosely around the tube using two bolts (3), four washers (4), and two nuts (2) .
Install clamp assemblies (6) onto the elbow using two bolts (1) and the two 5M-2894 Hard Washers previously removed.
Tighten the two bolts that were left loose.