LINK AS-TRACK 5263005 - Caterpillar

Installation Procedure
Illustration 1 g01019872
Illustration 2 g01019870
Attach a suitable lifting device to rear chassis support (10). The weight of rear chassis support (10) is approximately 318 kg (700 lb).
Install rear chassis support (10) .
Install bolts (11). Repeat this step for the opposite side.
Illustration 3 g01037824
Connect cable assembly (8) .
Connect harness assemblies (7) .
Install bolts (9) .
Illustration 4 g01019867
Connect hose assemblies (6) .
Illustration 5 g01037822
Connect hose assemblies (3), (4), and (5) .
Illustration 6 g01019858
Position tubes (1) to the original location. Install clamps (2). Connect tubes (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Level - Check" for the correct procedure.End By:
Install the hood. Refer to Disassembly and Assembly, "Engine Enclosure (Hood) - Install".
Install the fuel tank on the left side of the machine. Refer to Disassembly and Assembly, "Fuel Tank (Left Hand) - Install".
Install the fuel tank on the right side of the machine. Refer to Disassembly and Assembly, "Fuel Tank (Right Hand) - Install".