LINK AS-TRACK 5569364 - Caterpillar

Illustration 1 g00277604
(E) Stick cylinder (F) Bucket cylinder (G) Bucket linkage (H) Bucket (J) BoomNote: All bores must be free of paint. Coat all bores for pins with lubricant. This includes bucket pin bores and cylinder pin bores. (1) Torque for two bolts ... 460 60 N m (340 44 lb ft) (2) 107-9852 Pin Assembly Diameter after plating ... 69.85 .025 mm (2.750 0.001 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Bore diameter for pin ... 70 mm (2.76 inch) (3) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1 mm (0.04 inch) 133-2424 Shim ... 0.5 mm (0.02 inch) 093-0086 Shim ... 1 mm (0.04 inch) 093-0118 Shim ... 2 mm (0.08 inch) (4) 4I-4811 Pin Assembly Diameter after plating ... 69.85 .025 mm (2.750 0.001 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Bore diameter for pin ... 70 mm (2.76 inch) (5) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1 mm (0.04 inch) 133-2424 Shim ... 0.5 mm (0.02 inch) 093-0086 Shim ... 1 mm (0.04 inch) 093-0118 Shim ... 2 mm (0.08 inch) (6) Lubricate the sealing lip slightly with the lubricant that is being sealed. (7) 128-9863 Bearing Quantity ... 2 Outside diameter ... 106.200 .013 mm (4.1811 0.0005 inch) Inside diameter ... 90.27 0.02 mm (3.554 0.001 inch) Installation depth ... 9.5 0.8 mm (0.37 0.03 inch)Note: Assemble bearings with the groove to the inside of the boss. Assemble bearings with the groove at the rear of the bore. (8) 7Y-2395 Bearing Outside diameter ... 85.160 .013 mm (3.3527 0.0005 inch) Inside diameter ... 70.23 .02 mm (2.7650 0.0008 inch) Installation depth ... 7.5 .8 mm (0.30 0.03 inch) (9) 141-3806 Bearing Outside diameter ... 85.160 .013 mm (3.3527 0.0005 inch) Inside diameter ... 70.23 .02 mm (2.7650 0.0008 inch) Installation depth ... 7.5 .8 mm (0.30 0.03 inch)Note: Assemble bearings with the groove to the inside of the boss. Assemble bearings with the groove at the top ( 5 degrees) of the bore.