LINK (pin) 6G1632 - Caterpillar

Illustration 35 g03829580
(H) 30° 5
When installing harness assembly (2), position harness assembly (3) to dimension (H).
Illustration 36 g03829582
Install harness assembly (2) to bracket assembly (28). Install two flanges (32), four bolts (35), and four washers (33). Install grommet (30) and secure using cable strap (26).
Illustration 37 g03829602
Connect cable assembly (3) to cylinder. Secure cable assembly (3) to cylinder line using clip (10), bolt (19), washer (18), and nut (9).
Illustration 38 g03829637
Install bracket (7) to existing bracket using two washers (18), and two bolts (19).
Illustration 39 g03829612
Secure cable assembly (3) using clip (16), clip (17), screw (25), washer (18), and nut (9).
Secure cable assembly (3) using clip (16), clip (17), washer (18), spacer (14), and bolt (23).
Illustration 40 g06090611
Secure cable assembly (3) to bracket assembly (28) using clip (16), clip (17), washer (18), and bolt (21).
Illustration 41 g06090703
Secure cable assembly (4) to bracket assembly (28) using clip (16), clip (17), washer (18), and bolt (21). Secure using cable strap (15).
Illustration 42 g03830099
Install cover (29) using three washers (33), and three bolts (34).
Illustration 43 g06090729
Secure cable assembly (4) and cable assembly (27) to existing clip using spacer (14), clip (16), clip (17), washer (18), and bolt (23).
Illustration 44 g06090782
Secure cable assembly (4) to existing clip using clip (16), clip (17), and bolt (35).
Illustration 45 g06090821
Secure cable assembly (4) to cylinder using clip (16), clip (17), washer (33), and bolt (24).
Connect cable assembly (4) to cylinder.
Illustration 46 g03830084
Install bracket (6) to cylinder using two washers (18), and two bolts (19).
Illustration 47 g06090825
Install sensor (31) using two bolts (36).
Connect harness (27) to sensor (31). Secure harness (27) to the back of the blade with two clips (16), two clips (17), two washers (18). and two bolts (19).
Illustration 48 g06090827
Install cover (8) using two washers (37), and two bolts (5).Note: Slope assist needs enabled through Cat® ETCalibrating Slope Assist Control
Reference: Refer to Special Instruction, M0079120, "Slope Assist Calibration On Certain D6 Track-Type Tractors".After calibration is complete, prepare the machine for operation. Refer to the Operation and Maintenance Manual for instructions.Note: Stable blade option must be activated using the "Display" or "Electronic Technician" for the function to work.