LINK-FRONT STEERING 6G8525 - Caterpillar

Illustration 1. Elevator Group.1. Remove the flight assemblies from the chain assembly.2. Remove the 2T72 Chain Assemblies from the elevator.3. Replace both 2T249 Sprockets in the elevator drive group with the new 2T2259 Sprockets.4. Remove both 2T48 Idler Groups from the elevator frame.5. Replace the 2T242 Idlers in the idler groups with the 8J6561 Rollers.6. Reinstall both idler groups.
Illustration 2. 2T48 Idler Group.
Illustration 3. 2T46 Idler Group.7. Remove both 2T46 Idler Groups. Replace the 2T184 Idlers with the 3G7486 Rollers. Reinstall both idler groups.8. Remove two link assemblies from each 3G3391 Chain Assembly. Install the chain assemblies on the sprockets and idler rollers.9. Install the original (615) 2T12 Flight Assemblies on the chain assemblies. Only 15 flight assemblies will be used; three will be left over.