6Y1608 LINK-TRACK-LH Caterpillar parts
1090, 2290, 320B, 320C, 322 FM L, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 32...
Rating:
Alternative (cross code) number:
CA6Y1608
6Y-1608
6Y1608
CA6Y1608
6Y-1608
6Y1608
Weight: 11 pounds 5 kg.
EXCAVATOR, UNDERCARRIAGE,
This part in 4 request:
Show.
This information for suppliers only!
2023-07-20
2023-02-28
2022-08-29
2016-12-01
Compatible equipment models: 6Y1608:
Number on catalog scheme:
4
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6192 Pliers 1
B 7B-7974 Piston Ring Expander Gp 1 Note: Prior to removal from the engine, the pistons and connecting rod assemblies were marked. The components must be reassembled together. The components must be installed in the original location in the engine. Do not interchange any of the components.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01222629
Position the spring for the oil control piston ring in the oil ring groove in the piston body assembly.
Position oil control piston ring (3) over the spring. Position the oil control piston ring so that the gap is 180 degrees from the joint in the spring. Install the oil control piston ring on the piston with Tooling (B).
Use Tooling (B) to install intermediate piston ring (2) with the side that has the identification “UP-2” toward the top of the piston.
Use Tooling (B) to install top piston ring (1) with the side that has the identification “UP-1” toward the top of the piston.
Position top piston ring (1), intermediate piston ring (2), and oil control piston ring (3) so the gaps are 120 degrees from each other.
Check the clearance between the ends of top piston ring (1), intermediate piston ring (2), and oil control piston ring (3). Refer to Specifications, "Pistons And Rings".
Position piston body assembly (4) on connecting rod (6). Apply clean engine oil to connecting rod pin (7) and install the connecting rod pin. Install pin retainers (5) with Tooling (A).
Install upper connecting rod bearing (8) in connecting rod (6). Note: Ensure that the bearing locking tab is located in the notch of the connecting rod.
Install lower connecting rod bearing (9) in connecting rod bearing cap (10). Note: Ensure that the bearing locking tab is located in the notch of the connecting rod bearing cap.
Ensure that the dowels are installed in the connecting rod bearing cap. End By:
Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6192 Pliers 1
B 7B-7974 Piston Ring Expander Gp 1 Note: Prior to removal from the engine, the pistons and connecting rod assemblies were marked. The components must be reassembled together. The components must be installed in the original location in the engine. Do not interchange any of the components.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01222629
Position the spring for the oil control piston ring in the oil ring groove in the piston body assembly.
Position oil control piston ring (3) over the spring. Position the oil control piston ring so that the gap is 180 degrees from the joint in the spring. Install the oil control piston ring on the piston with Tooling (B).
Use Tooling (B) to install intermediate piston ring (2) with the side that has the identification “UP-2” toward the top of the piston.
Use Tooling (B) to install top piston ring (1) with the side that has the identification “UP-1” toward the top of the piston.
Position top piston ring (1), intermediate piston ring (2), and oil control piston ring (3) so the gaps are 120 degrees from each other.
Check the clearance between the ends of top piston ring (1), intermediate piston ring (2), and oil control piston ring (3). Refer to Specifications, "Pistons And Rings".
Position piston body assembly (4) on connecting rod (6). Apply clean engine oil to connecting rod pin (7) and install the connecting rod pin. Install pin retainers (5) with Tooling (A).
Install upper connecting rod bearing (8) in connecting rod (6). Note: Ensure that the bearing locking tab is located in the notch of the connecting rod.
Install lower connecting rod bearing (9) in connecting rod bearing cap (10). Note: Ensure that the bearing locking tab is located in the notch of the connecting rod bearing cap.
Ensure that the dowels are installed in the connecting rod bearing cap. End By:
Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Cat SIS web machinery list:
Parts link Caterpillar catalog:
1090, 1190, 320C FM, 320D, 320D FM, 320D FM RR, 517, 953C, D5H, D5H XL, D5HTSK II, D5R LGP, D6K LGP, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, D6N OEM, OEMS, PL61, TK711, TK721
320 L, 320B, 320C, 320N, 325, 325 LN, 325B L, 325C, 325C FM, 330, 330 FM L, 330C L, 345B II, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 375, 5080
322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 385B, 385C L
322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L
322B, 322B LN, 325B, 325B L, 330B L
320B, 320C, 325C, 325C FM, 330C L, 345B II
322C, 322C FM
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 325D,...
1583642
LINK
515, 517, 525, 527
515, 517, 525, 527
1747114
LINK
515, 517, 525, 525B, 527
515, 517, 525, 525B, 527
1200144
LINK-CONNECTING
515, 525, 525B, 525C, 535B, 535C, 545, 545C
515, 525, 525B, 525C, 535B, 535C, 545, 545C
1583565
LINK AS
515, 525
515, 525
9U4624
LINK AS
515, 525
515, 525
1268892
LINK-DRIVE
515, 517, 525, 527, 545
515, 517, 525, 527, 545
322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L
1122901
LINK AS
322B L, 325B L, 330, 330 FM L, 330B L
322B L, 325B L, 330, 330 FM L, 330B L
322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 385B, 385C L
1090, 2290, 320B, 320C, 322 FM L, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 32...
1151853
LINK-TRACK MASTER
320B, 320C, 322 FM L, 322B L, 322C, 322C FM, 323D LN, 323D SA, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 330C, 330C L, 330D, 330D L, 336D L, 336D LN, 336E, 345...
320B, 320C, 322 FM L, 322B L, 322C, 322C FM, 323D LN, 323D SA, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 330C, 330C L, 330D, 330D L, 336D L, 336D LN, 336E, 345...
1151854
LINK-TRACK MASTER
320B, 320C, 322 FM L, 322B L, 322C, 322C FM, 323D LN, 323D SA, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 330C, 330C L, 330D, 330D L, 336D L, 336D LN, 336E, 345...
320B, 320C, 322 FM L, 322B L, 322C, 322C FM, 323D LN, 323D SA, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 330C, 330C L, 330D, 330D L, 336D L, 336D LN, 336E, 345...