LINK AS-TRACK 6Y1691 - Caterpillar

Breathing ether vapors or repeated contact of ether with skin can cause personal injury. Personal injury may occur from failure to adhere to the following procedures.Use ether only in well ventilated areas.Do not smoke while changing ether cylinders.Use ether with care to avoid fires.Do not store replacement ether cylinders in living areas or in the operator's compartment.Do not store ether cylinders in direct sunlight or at temperatures above 49 °C (120 °F).Discard cylinders in a safe place. Do not puncture or burn cylinders.Keep ether cylinders out of the reach of unauthorized personnel.
Park the machine on a level surface and stop the engine. Make sure that the transmission control is in the PARK position.
Illustration 1 g01272371
Open access door (1) .
Loosen clamp (2) and unscrew ether starting aid cylinder (3) .
Remove the used gasket. Install the new gasket that is provided with the ether starting aid cylinder.Note: Install protective cap (4) if an ether starting aid cylinder will not be in place.
Install a new ether starting aid cylinder. Tighten the clamp.
Close the access door.