6Y2589 LINK-TRACK Caterpillar parts
1290T, 1390, 2491, 2590, 312D, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, ...
Rating:
Alternative (cross code) number:
CA6Y2589
6Y-2589
6Y2589
CA6Y2589
6Y-2589
6Y2589
Weight: 14 pounds 6 kg.
EXCAVATOR, UNDERCARRIAGE,
This part in 2 request:
Show.
This information for suppliers only!
2022-07-18
2019-09-24
Compatible equipment models: 6Y2589:
Number on catalog scheme:
5
For full view, you need register
Information:
START BY:a. remove valve coversb. remove rocker shaft assemblies and pushrodsc. remove fuel injection nozzles
Be sure that the piston is at Top Center so that the valves will be held in position when the springs are removed.
1. Remove the valve cover bases.2. Remove the valve stem locks with tooling (A) using the following procedure: a. Install adapter plate (1) with two 0S1618 (5/16-18 x 1 in.) bolts.b. Install stud (2) and nut (3). Tighten the nut. c. Install plate (4), washer (5) and nut (6). Tighten the nut until the locks are free.d. Remove locks (7), and remove the nut, washer and plate from the stud. Remove the stud and adapter plate from the fuel injection nozzle adapter. 3. Remove rotocoil (8), spring (9) and washer (10). 4. Use tool (B) to remove fuel injection nozzle adapter (11) from the cylinder head assembly. 5. Remove washers (12) and seals (13) from adapters (11).Install Fuel Injection Nozzle Adapters
1. Inspect seals (3) for damage or wear, and make a replacement if necessary.2. Install washers (1) and seals (3) on adapters (2).3. Put liquid soap in the bores of the cylinder head and on the seals of the fuel injection nozzle adapters.4. Put 5P3931 Anti-Seize Compound on the threads of adapter (2), and install the adapters in the cylinder head assembly. 5. Use tool (A), and tighten the adapters to a torque of 205 14 N m (150 10 lb.ft.). 6. Install washers (6), springs (5) and rotocoils (4). 7. Use tool (B), and compress the springs until locks (7) can be installed. Install locks (7) on the valve stems, and remove tool (B).8. Install the valve cover base. Tighten the valve cover base mounting bolts to a torque of 14 3 N m (10 2 lb.ft.).END BY:a. install fuel injection nozzlesb. install rocker shaft assemblies and push rodsc. install valve covers
Be sure that the piston is at Top Center so that the valves will be held in position when the springs are removed.
1. Remove the valve cover bases.2. Remove the valve stem locks with tooling (A) using the following procedure: a. Install adapter plate (1) with two 0S1618 (5/16-18 x 1 in.) bolts.b. Install stud (2) and nut (3). Tighten the nut. c. Install plate (4), washer (5) and nut (6). Tighten the nut until the locks are free.d. Remove locks (7), and remove the nut, washer and plate from the stud. Remove the stud and adapter plate from the fuel injection nozzle adapter. 3. Remove rotocoil (8), spring (9) and washer (10). 4. Use tool (B) to remove fuel injection nozzle adapter (11) from the cylinder head assembly. 5. Remove washers (12) and seals (13) from adapters (11).Install Fuel Injection Nozzle Adapters
1. Inspect seals (3) for damage or wear, and make a replacement if necessary.2. Install washers (1) and seals (3) on adapters (2).3. Put liquid soap in the bores of the cylinder head and on the seals of the fuel injection nozzle adapters.4. Put 5P3931 Anti-Seize Compound on the threads of adapter (2), and install the adapters in the cylinder head assembly. 5. Use tool (A), and tighten the adapters to a torque of 205 14 N m (150 10 lb.ft.). 6. Install washers (6), springs (5) and rotocoils (4). 7. Use tool (B), and compress the springs until locks (7) can be installed. Install locks (7) on the valve stems, and remove tool (B).8. Install the valve cover base. Tighten the valve cover base mounting bolts to a torque of 14 3 N m (10 2 lb.ft.).END BY:a. install fuel injection nozzlesb. install rocker shaft assemblies and push rodsc. install valve covers
Cat SIS web machinery list:
Parts link Caterpillar catalog:
320 L, 320B, 320C, 320N, 325, 325 LN, 325B L, 325C, 325C FM, 330, 330 FM L, 330C L, 345B II, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 375, 5080
322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 385B, 385C L
322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L
322B, 322B LN, 325B, 325B L, 330B L
320B, 320C, 325C, 325C FM, 330C L, 345B II
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
322C, 325C, 330C, 330C FM, 330C L, 385B, 385C L
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 325D,...
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 325D,...
320C, 330D L
1187302
LINK-TRACK MASTER
312D, 325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L, OEMS, TK1051
312D, 325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L, OEMS, TK1051
1187303
LINK-TRACK MASTER
312D, 325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L, OEMS, TK1051
312D, 325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 340D L, 345C L, 345D, 349D L, OEMS, TK1051
1290T, 1390, 2491, 2590, 312D, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, ...
3335629
LINK-TRACK MASTER
305.5E, 306, 306E
305.5E, 306, 306E
3335628
LINK-TRACK
305.5E, 306, 306E
305.5E, 306, 306E
3335626
LINK-TRACK MASTER
305.5E, 306, 306E
305.5E, 306, 306E
3661745
LINK & BEARING AS
M318D MH, M322D MH
M318D MH, M322D MH
3609502
LINK AS
M318D MH, M322D, M322D MH
M318D MH, M322D, M322D MH
3609501
LINK AS
M318D MH, M322D, M322D MH
M318D MH, M322D, M322D MH
3569596
LINK AS
M315D, M316D, M318D
M315D, M316D, M318D
3569586
LINK AS
M315D, M316D, M318D
M315D, M316D, M318D
3851278
LINK AS
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...