6Y5411 LINK AS-TRACK Caterpillar parts
D4H
Rating:
Alternative (cross code) number:
CA6Y5411
6Y-5411
6Y5411
CA6Y5411
6Y-5411
6Y5411
TRACK-TYPE TRACTOR,
Compatible equipment models: 6Y5411:
Number on catalog scheme:
For full view, you need register
Information:
Stopping the Machine
Park on a level surface. If it is necessary to park on a grade, block the wheels securely.Do not apply the parking/secondary brake while machine is moving unless an emergency exists.
1. Apply the service brakes to stop the machine. 2. Move the transmission control to NEUTRAL. 3. Push the knob IN to engage the transmission control lock. 4. Pull the knob UP to engage the parking/secondary brake.5. Lower the bucket to the ground and apply slight down pressure.Stopping the Engine
1. With the machine stopped, run the engine for 5 minutes at low idle. 2. Pull the accelerator pedal back past the detent to stop the engine. Turn off the power switch key. Remove the key. 3. Use the ladder and handholds, use both hands and face the machine when dismounting. 4. Drain the moisture from the air tank daily.5. Inspect the engine compartment for paper and debris. Clean out any debris and paper to avoid a fire. 6. If the machine is being parked for an extended period (overnight, etc.), turn off the disconnect switch and remove the key. Install all vandalism protection locks and covers.
Park on a level surface. If it is necessary to park on a grade, block the wheels securely.Do not apply the parking/secondary brake while machine is moving unless an emergency exists.
1. Apply the service brakes to stop the machine. 2. Move the transmission control to NEUTRAL. 3. Push the knob IN to engage the transmission control lock. 4. Pull the knob UP to engage the parking/secondary brake.5. Lower the bucket to the ground and apply slight down pressure.Stopping the Engine
1. With the machine stopped, run the engine for 5 minutes at low idle. 2. Pull the accelerator pedal back past the detent to stop the engine. Turn off the power switch key. Remove the key. 3. Use the ladder and handholds, use both hands and face the machine when dismounting. 4. Drain the moisture from the air tank daily.5. Inspect the engine compartment for paper and debris. Clean out any debris and paper to avoid a fire. 6. If the machine is being parked for an extended period (overnight, etc.), turn off the disconnect switch and remove the key. Install all vandalism protection locks and covers.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts link Caterpillar catalog:
216, 216B, 216B3, 226B, 226B3, 228, 236, 236B, 236B3, 242B, 242B3, 246C, 246D, 247, 247B, 247B3, 248, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 262D, 267, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, ...
3W1457
LINK-SWIVEL
D4H, D5H
D4H, D5H
3W3254
LINK AS
D4H, D5H
D4H, D5H
3W3259
LINK AS
D4H, D5H
D4H, D5H
3W3258
LINK AS
D4H, D4HTSK II
D4H, D4HTSK II
953C, 953D, D5H XL, D6M, D6N
3163370
LINK AS-TRACK
D11R, D11T
D11R, D11T
2181974
LINK AS-TRACK
345B, 345C
345B, 345C
3541910
LINK GP-STEERING FRAME LOCK
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
D6H, D6H XL, D6R, D6R II, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL
6Y1510
LINK AS-TRACK
933, D3B, D3C, D3C II, D3C III, D4B, D4C, D4C II, D4C III
933, D3B, D3C, D3C II, D3C III, D4B, D4C, D4C II, D4C III
3510958
LINK AS-TRACK
527, D6H XL, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
527, D6H XL, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL