7T4629 LINK AS-TRACK Caterpillar parts
943
Rating:
Alternative (cross code) number:
CA7T4629
7T-4629
7T4629
CA7T4629
7T-4629
7T4629
Weight: 660 pounds 299 kg.
TRACK LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$3,054.89
05 Jul 2021
688.6[309.87] Pounds
US: AIS Constructio
CR4261/38 - Sealed & Lubed Track Link Assembly Chain Fits Caterpillar & Fits John Deere Models Made to Replace 01020638 1543647 1543661 154-3647 154-3661 1V4607 7T4629
AIS Forged From Boron Steel - Pins & Bearings are Manufactured to Ensure a Perfect Fit Sealing/Joint Integrity || Quenched, Tempered, and Hardened Using the Latest Automated Link Hardening Equipment || Excellent Wear Resistance Under Even the Most Severe Working Conditions || Replaces Part Number: CR-4261/38 || An Alternative for Part Numbers: 01020638 1543647 1543661 154-3647 154-3661 1V4607 7T4629
AIS Forged From Boron Steel - Pins & Bearings are Manufactured to Ensure a Perfect Fit Sealing/Joint Integrity || Quenched, Tempered, and Hardened Using the Latest Automated Link Hardening Equipment || Excellent Wear Resistance Under Even the Most Severe Working Conditions || Replaces Part Number: CR-4261/38 || An Alternative for Part Numbers: 01020638 1543647 1543661 154-3647 154-3661 1V4607 7T4629
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 7T4629:
Information:
Your engine may not have the same gauges or all of the gauges that are described. For more information about the gauge package, refer to the specifications for your engine.Gauges provide indications of engine performance. Ensure that the gauges are in good working order. Determine the normal operating range by observing the gauges over a period of time.Noticeable changes in gauge readings indicate potential gauge or engine problems. Problems may also be indicated by gauge readings that change even if the readings are within specifications. Determine and correct the cause of any significant change in the readings. Consult your Caterpillar dealer for assistance.
If no oil pressure is indicated, STOP the engine. Engine damage can result.
Engine Oil Pressure - The oil pressure should be greatest after a cold engine is started. The typical oil pressure for turbocharged engines at rated rpm with SAE10W30 is 275 to 606 kPa (40 to 88 psi).A lower oil pressure is normal at low idle. The minimum recommended oil pressure at 600 rpm is 103 kPa (15 psi). If the load is stable and the gauge reading changes, perform the following procedure:
Remove the load.
Reduce engine speed to low idle.
Check the oil level and maintain the oil level.
Jacket Water Coolant Temperature - Typical temperature range is 87 to 98°C (189 to 209°F). The maximum allowable temperature is 104°C (220°F). Higher temperatures may occur under certain conditions. The water temperature reading may vary according to load. The reading should never exceed the boiling point for the pressurized system that is being used.If the engine is operating above the normal range and steam becomes apparent, perform the following procedure:
Reduce the load and the engine rpm.
Inspect the cooling system for leaks.
Determine if the engine must be shut down immediately or if the engine can be cooled by reducing the load.
Tachometer - This gauge indicates engine rpm (speed). When the throttle control lever is moved to the full throttle position without load, the engine is running at high idle. The engine is running at the full load rpm when the throttle control lever is at the full throttle position with maximum rated load.
To help prevent engine damage, never exceed the high idle rpm. Overspeeding can result in serious damage to the engine. The engine can be operated at high idle without damage, but should never be allowed to exceed high idle rpm.
Note: The high idle rpm and the full load rpm are stamped on the Information Plate.
Ammeter - This gauge indicates the amount of charge or discharge in the battery charging circuit. Operation of the indicator should be to the right side of "0"(zero).
Fuel Level - This gauge indicates the fuel level in the fuel tank. The fuel level gauge operates when the start switch is "ON".
Fuel Pressure - This gauge indicates fuel pressure to the fuel injection pump. If the gauge moves to the "out" position the engine will not operate properly. If the gauge is below 160 kPa (23 psi) the engine will not operate properly. A
If no oil pressure is indicated, STOP the engine. Engine damage can result.
Engine Oil Pressure - The oil pressure should be greatest after a cold engine is started. The typical oil pressure for turbocharged engines at rated rpm with SAE10W30 is 275 to 606 kPa (40 to 88 psi).A lower oil pressure is normal at low idle. The minimum recommended oil pressure at 600 rpm is 103 kPa (15 psi). If the load is stable and the gauge reading changes, perform the following procedure:
Remove the load.
Reduce engine speed to low idle.
Check the oil level and maintain the oil level.
Jacket Water Coolant Temperature - Typical temperature range is 87 to 98°C (189 to 209°F). The maximum allowable temperature is 104°C (220°F). Higher temperatures may occur under certain conditions. The water temperature reading may vary according to load. The reading should never exceed the boiling point for the pressurized system that is being used.If the engine is operating above the normal range and steam becomes apparent, perform the following procedure:
Reduce the load and the engine rpm.
Inspect the cooling system for leaks.
Determine if the engine must be shut down immediately or if the engine can be cooled by reducing the load.
Tachometer - This gauge indicates engine rpm (speed). When the throttle control lever is moved to the full throttle position without load, the engine is running at high idle. The engine is running at the full load rpm when the throttle control lever is at the full throttle position with maximum rated load.
To help prevent engine damage, never exceed the high idle rpm. Overspeeding can result in serious damage to the engine. The engine can be operated at high idle without damage, but should never be allowed to exceed high idle rpm.
Note: The high idle rpm and the full load rpm are stamped on the Information Plate.
Ammeter - This gauge indicates the amount of charge or discharge in the battery charging circuit. Operation of the indicator should be to the right side of "0"(zero).
Fuel Level - This gauge indicates the fuel level in the fuel tank. The fuel level gauge operates when the start switch is "ON".
Fuel Pressure - This gauge indicates fuel pressure to the fuel injection pump. If the gauge moves to the "out" position the engine will not operate properly. If the gauge is below 160 kPa (23 psi) the engine will not operate properly. A
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts link Caterpillar catalog:
215, 225, 312B L, 312C, 312D, 323D LN, 941, 943, D4D, D4E, D4E SR, D5C, PM-201, PM-565, PM-565B, PR-1000
215, 225, 312B L, 312C, 312D, 323D LN, 941, 943, D4D, D4E, D4E SR, D5C, PM-201, PM-565, PM-565B, PR-1000
312B L, 312C, 941, 943, 955K, D4D, D4E, D4E SR, D5C
312B L, 312C, 941, 943, D4D, D4E, D4E SR, D5C
8G1143
LINK AS
943, 953, 953B, 963, 963B, 973
943, 953, 953B, 963, 963B, 973
8G0244
LINK AS
943, 953, 953B, 963, 963B, 973
943, 953, 953B, 963, 963B, 973
8G1378
LINK AS-SPRING
943, 953, 963, 973
943, 953, 963, 973
941, 943
7P4972
LINK ASSEM.
943, 953
943, 953
1V4602
LINK AS-TRACK
D4D, D4E
D4D, D4E
D4D, D4E
235, 235B, 235C
4T4847
LINK GP
D5H
D5H
