7T4647 LINK-MASTER Caterpillar parts
963
Rating:
Alternative (cross code) number:
CA7T4647
7T-4647
7T4647
CA7T4647
7T-4647
7T4647
Weight: 8 pounds 3 kg.
TRACK LOADER,
Compatible equipment models: 7T4647:
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00684088
Remove the bolts and plate (2) from the rear of the machine.
Remove the bolt that holds clip (3) to the transmission. Move the clip and hose (1) away from the control valve.
Illustration 2 g00684085
Disconnect the rod ends (4) from the control valve.
Remove cover (5) .
Illustration 3 g00684081
Disconnect wire harness (6) from switch (7) .
Remove the bolt that holds clip (6) in place. Move the wire harness away from the control valve.
Illustration 4 g00684077
Remove the bolts, flywheel clutch control valve (8), and the gasket from the transmission.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00684088
Remove the bolts and plate (2) from the rear of the machine.
Remove the bolt that holds clip (3) to the transmission. Move the clip and hose (1) away from the control valve.
Illustration 2 g00684085
Disconnect the rod ends (4) from the control valve.
Remove cover (5) .
Illustration 3 g00684081
Disconnect wire harness (6) from switch (7) .
Remove the bolt that holds clip (6) in place. Move the wire harness away from the control valve.
Illustration 4 g00684077
Remove the bolts, flywheel clutch control valve (8), and the gasket from the transmission.
Caterpillar parts catalog:
Parts link Caterpillar catalog:
963, 963B, 963C
963, 963B, 963C
8G1566
LINK ASSEM.
963, 973
963, 973
3W8404
LINK AS
963
963
3W8401
LINK AS
963
963
6T0302
LINK AS
953, 973, AD40, AD45, AE40, D10, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, R1300, R1600, R1600G, R1600H, R1700G
953, 973, AD40, AD45, AE40, D10, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, R1300, R1600, R1600G, R1600H, R1700G
8H1180
LINK ASSEM.
955C
955C
7T8427
LINK
D5H
D5H
7T8425
LINK-RH
D5H
D5H
7T8426
LINK
D5H
D5H
7T8428
LINK
D5H
D5H
8E4506
LINK-TRACK-LH
D8N, D8R, D8R II, D8T
D8N, D8R, D8R II, D8T