7Y9525 LINK & BEARING AS Caterpillar parts
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 5080
Rating:
Alternative (cross code) number:
CA7Y9525
7Y-9525
7Y9525
CA7Y9525
7Y-9525
7Y9525
Weight: 275 pounds 124 kg.
EXCAVATOR, FRONT SHOVEL,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$1,666.00
17 May 2023
US: Florida-Parts-Z
7Y9525 - Link & Bearing AS for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$1,492.02
27 Nov 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Link & BRG Assy 7Y9525 New
$1,261.53
06 Aug 2020
275.6219199524[123.75] Po
-: -
Caterpillar LINK & BRG ASSY (7Y9525) New Aftermarket By CTP
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 7Y9525:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench Assembly 1 Start By:
Remove the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install".
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01062266
Disconnect harness assembly (1). Lay harness assembly (1) out of the way.
Illustration 2 g01062271
Remove nuts (2), the bolts, and the washers.
Remove hose (3) .
Use Tooling (A) to remove fuel filter (5). Disconnect hose assembly (4). Plug all openings immediately.
Remove bolt (6), the washer, and the clip.
Disconnect harness assembly (7) and cut cable straps (8) .
Illustration 3 g01062274
Remove nut (9), the washer, and the clip.
Loosen bolt (10) until harness assembly (11) can be disconnected. Disconnect harness assembly (11). Position the harness assembly away from the cylinder head.
Illustration 4 g01062275
Disconnect fittings (12). Remove bolts (13) and the washers. Remove tube assembly (14) .
Illustration 5 g01062276
Remove bolts (15) and the washers. Remove water outlet manifold (16) .
Remove the spacers from the head bolt studs.
Illustration 6 g01062278
Note: Engines that are equipped with a compression brake will have three head bolt studs. The three head bolt studs are installed in place of head bolts. Remove the head bolt studs with the head bolts.
Remove head bolts (17) and the head bolt studs, if equipped.
Remove the gasket from cylinder head (18) .
Illustration 7 g01062281
Attach a suitable lifting device to cylinder head (18). Ensure that all wires, lines, and hoses are free from the cylinder head.
Carefully remove cylinder head (18) from the cylinder block. The weight of cylinder head (18) is approximately 135 kg (300 lb).
Remove cylinder head gasket (19) and the O-ring seals from the cylinder block.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench Assembly 1 Start By:
Remove the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install".
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01062266
Disconnect harness assembly (1). Lay harness assembly (1) out of the way.
Illustration 2 g01062271
Remove nuts (2), the bolts, and the washers.
Remove hose (3) .
Use Tooling (A) to remove fuel filter (5). Disconnect hose assembly (4). Plug all openings immediately.
Remove bolt (6), the washer, and the clip.
Disconnect harness assembly (7) and cut cable straps (8) .
Illustration 3 g01062274
Remove nut (9), the washer, and the clip.
Loosen bolt (10) until harness assembly (11) can be disconnected. Disconnect harness assembly (11). Position the harness assembly away from the cylinder head.
Illustration 4 g01062275
Disconnect fittings (12). Remove bolts (13) and the washers. Remove tube assembly (14) .
Illustration 5 g01062276
Remove bolts (15) and the washers. Remove water outlet manifold (16) .
Remove the spacers from the head bolt studs.
Illustration 6 g01062278
Note: Engines that are equipped with a compression brake will have three head bolt studs. The three head bolt studs are installed in place of head bolts. Remove the head bolt studs with the head bolts.
Remove head bolts (17) and the head bolt studs, if equipped.
Remove the gasket from cylinder head (18) .
Illustration 7 g01062281
Attach a suitable lifting device to cylinder head (18). Ensure that all wires, lines, and hoses are free from the cylinder head.
Carefully remove cylinder head (18) from the cylinder block. The weight of cylinder head (18) is approximately 135 kg (300 lb).
Remove cylinder head gasket (19) and the O-ring seals from the cylinder block.
Caterpillar parts catalog:
Parts link Caterpillar catalog:
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 L, 325...
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 ...
315B, 315B L, 317B LN, 318B, 320B, 325B L, 330B L, 345B L
318B, 320B, 322, 325, 325 L, 325 LN, 325B L, 330B L, 345B L
318C, 319C, 320B, 320C, 320C FM, 320C L, 321C, 322C, 325B L, 325C, 325C L, 330B L, 330C, 345B II, 345B L
320 L, 320B, 320C, 320N, 325, 325 LN, 325B L, 325C, 325C FM, 330, 330 FM L, 330C L, 345B II, 350, 350 L, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 375, 5080
322B L, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330B L, 330C, 330C FM, 330C L, 385B, 385C L
322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L
322B, 322B LN, 325B, 325B L, 330B L
320B, 320C, 325C, 325C FM, 330C L, 345B II
330, 330 FM L, 330 L, 330B L, 330C, 330C L
320 L, 320B, 320C, 320N, 325, 325 LN, 325B L, 325C, 325C FM, 330, 330 FM L, 330C L, 345B II, 350, 350 L, 5080
01002027
LINK, TRANSMISSION
CS-431
CS-431
90000195
LINK ASSY. - R.H.
CS-431
CS-431
90000194
LINK ASSY. - L.H.
CS-431
CS-431
96840
LINK BAR-LOWER
PR-275
PR-275
96838
LINK BAR-UPPER
PR-275
PR-275
1488558
LINK AS
375, 5080
375, 5080
1502300
LINK AS
375, 5080
375, 5080
1681805
LINK & BEARING AS
375, 5080
375, 5080
1502299
LINK AS
375, 5080
375, 5080
320B, 325B, 325B L, 345B L, 375, 5080
320 L, 320B, 320N, 325, 325 LN, 325B, 325B L, 330, 330 FM L, 345B L, 350, 350 L, 375, 5080