8E7407 LINK-TRACK MASTER Caterpillar parts
1190, 1190T, 322C, 325C FM, 325C L, 527, 963C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, OEMS, TK721, TK722, TK741
Rating:
Alternative (cross code) number:
CA8E7407
8E-7407
8E7407
CA8E7407
8E-7407
8E7407
Weight: 8 pounds 3 kg.
EXCAVATOR, UNDERCARRIAGE,
This part in 2 request:
Show.
This information for suppliers only!
2018-01-15
2017-11-24
Compatible equipment models: 8E7407:
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 5P-7312 Seal Distorter 1
C 5P-7315 Wear Sleeve Distorter Ring 1 Start By:
Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install" .
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: When a crankshaft seal is replaced, the wear sleeve must also be replaced.
Illustration 1 g00487923
Remove six bolts (1) . Remove trunnion (2) and the O-ring seal.
Illustration 2 g00488000
Use Tool (A) to remove the crankshaft seal from trunnion (2) .
Illustration 3 g00488003
Install the O-ring seal and trunnion (2) with six bolts (1) .
Care should be taken to ensure that the seal distorter does not cut through the wear sleeve. Damage to the crankshaft surface may occur leading to possible oil seal leaks.
Install Tool (C) . Install Tool (B) between Tool (C) and the wear sleeve. Turn Tool (B) with a wrench, until the edge of the tool makes a flat crease in the wear sleeve. Repeat this process until there are enough creases in the wear sleeve in order to allow the wear sleeve to be slipped off the end of the crankshaft.
Remove Tools (B) and (C) and remove the wear sleeve by hand.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 5P-7312 Seal Distorter 1
C 5P-7315 Wear Sleeve Distorter Ring 1 Start By:
Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install" .
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: When a crankshaft seal is replaced, the wear sleeve must also be replaced.
Illustration 1 g00487923
Remove six bolts (1) . Remove trunnion (2) and the O-ring seal.
Illustration 2 g00488000
Use Tool (A) to remove the crankshaft seal from trunnion (2) .
Illustration 3 g00488003
Install the O-ring seal and trunnion (2) with six bolts (1) .
Care should be taken to ensure that the seal distorter does not cut through the wear sleeve. Damage to the crankshaft surface may occur leading to possible oil seal leaks.
Install Tool (C) . Install Tool (B) between Tool (C) and the wear sleeve. Turn Tool (B) with a wrench, until the edge of the tool makes a flat crease in the wear sleeve. Repeat this process until there are enough creases in the wear sleeve in order to allow the wear sleeve to be slipped off the end of the crankshaft.
Remove Tools (B) and (C) and remove the wear sleeve by hand.
Cat SIS web machinery list:
Parts link Caterpillar catalog:
1090, 1190T, 311, 311B, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B L, 320B U,...
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 L, 325...
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 321B, 321C, 322, 322 FM L, 322B L, 322C, 325, 325 ...
318C, 319C, 320B, 320C, 320C FM, 320C L, 321C, 322C, 325B L, 325C, 325C L, 330B L, 330C, 345B II, 345B L
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
1090, 1190, 320C FM, 320D, 320D FM, 320D FM RR, 517, 953C, D5H, D5H XL, D5HTSK II, D5R LGP, D6K LGP, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, D6N OEM, OEMS, PL61, TK711, TK721
963, 963B, 963C
963, 963B, 963C
D6R II
320 L, 320B, 320C, 320N, 325, 325 LN, 325B L, 325C, 325C FM, 330, 330 FM L, 330C L, 345B II, 350, 350 L, 5080
1190, 1190T, 322C, 325C FM, 325C L, 527, 963C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, OEMS, TK721, TK722, TK741
8E7410
LINK-TRACK MASTER
1190, 1190T, 322C, 325C FM, 325C L, 527, 963C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, OEMS, TK721, TK722, TK741
1190, 1190T, 322C, 325C FM, 325C L, 527, 963C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, OEMS, TK721, TK722, TK741
8E7405
LINK-TRACK
1190, 1190T, 1390, 2390, 2391, 322C, 324D FM, 325C FM, 325C L, 325D FM, 325D FM LL, 521, 522, 527, 541, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL, OEMS, TK721, TK722, TK741
1190, 1190T, 1390, 2390, 2391, 322C, 324D FM, 325C FM, 325C L, 325D FM, 325D FM LL, 521, 522, 527, 541, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL, OEMS, TK721, TK722, TK741
1190, 1190T, 1390, 2390, 2391, 322C, 324D FM, 325C FM, 325C L, 325D FM, 325D FM LL, 521, 522, 527, 541, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL, OEMS, TK721, TK722, TK741
1664433
LINK-STABILIZER
D6R, D6R II
D6R, D6R II
1624317
LINK AS
312B
312B
8Y6062
LINK-ACTUATOR
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
3788241
LINK-TRACK
527, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
527, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
527, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL
963C, D6H XL, D6R, D6R II
963C, D6H XL, D6R, D6R II
8E7408
LINK-TRACK MASTER
1190, 1190T, 322C, 325C FM, 325C L, 527, 963C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, OEMS, TK721, TK722, TK741
1190, 1190T, 322C, 325C FM, 325C L, 527, 963C, D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, OEMS, TK721, TK722, TK741