8E8644 LINK AS-TRACK Caterpillar parts
235C, 235D
Rating:
Alternative (cross code) number:
CA8E8644
8E-8644
8E8644
CA8E8644
8E-8644
8E8644
Weight: 2301 pounds 1043 kg.
EXCAVATOR,
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Laser 4044 Fuel Injector Puller 1
B 422-7170 Capping Kit 1 Start By:
Remove the fuel injection lines.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06321454
Illustration 2 g06327655
Disconnect hose assembly (1) and hose (3) from fuel injector (2).
Use Tooling (B) to plug fuel injector (2).
Remove bolt (4) and clamp (5) from fuel injector (2).
Use Tooling (A) to remove fuel injector (2) from the cylinder head. Remove fuel injector (2).
Remove O-ring seal (6) and seat washer (7) from fuel injector (2).
If necessary, repeat Step 1 through Step 5 to remove the remaining fuel injectors.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Laser 4044 Fuel Injector Puller 1
B 422-7170 Capping Kit 1 Start By:
Remove the fuel injection lines.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06321454
Illustration 2 g06327655
Disconnect hose assembly (1) and hose (3) from fuel injector (2).
Use Tooling (B) to plug fuel injector (2).
Remove bolt (4) and clamp (5) from fuel injector (2).
Use Tooling (A) to remove fuel injector (2) from the cylinder head. Remove fuel injector (2).
Remove O-ring seal (6) and seat washer (7) from fuel injector (2).
If necessary, repeat Step 1 through Step 5 to remove the remaining fuel injectors.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts link Caterpillar catalog:
8V2333
LINK AS
215, 227, 229, 235C, 245, 245B
215, 227, 229, 235C, 245, 245B
4T1115
LINK-PISTON
16G, 225, 227, 235D, 245, 245B, 245D
16G, 225, 227, 235D, 245, 245B, 245D
7T9824
LINK-TRACK-LH
235, 235C
235, 235C
235, 235C
6W4336
LINK AS
235B, 235C
235B, 235C
6W4338
LINK AS (BEARING)
235B, 235C
235B, 235C
3G9708
LINK-PISTON
231D, 235D, 973
231D, 235D, 973
8E8642
LINK-TRACK-LH
235C
235C
8E8641
LINK-TRACK-RH
235C
235C
235, 235C
2061469
LINK AS-TRACK
1090, 1190, 320C FM, 320D, 320D FM, 320D FM RR, OEMS, TK711, TK721
1090, 1190, 320C FM, 320D, 320D FM, 320D FM RR, OEMS, TK711, TK721
3312707
LINK GP-STABILIZER
TS185, TS225
TS185, TS225
7V3656
LINK GP-STEERING LOCK
916, 918F, 924F, 926, 926A, G916, IT18, IT18B, IT18F, IT24F, IT28, IT28B
916, 918F, 924F, 926, 926A, G916, IT18, IT18B, IT18F, IT24F, IT28, IT28B
4236758
LINK GP
308E, 308E2 CR
308E, 308E2 CR
2058267
LINK AS-TRACK
D3C III
D3C III
6R0198
LINK GP-STEERING
AP-1000
AP-1000
1160994
LINK GP-STEERING FRAME LOCK
928F, IT28F
928F, IT28F
1690015
LINK AS-LH
35, 45
35, 45