8K5150 LINK GROUP (Rear) Caterpillar parts
966C
Rating:
Alternative (cross code) number:
CA8K5150
8K-5150
8K5150
CA8K5150
8K-5150
8K5150
Weight: 1 pounds 0 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$251.52
15 Dec 2021
US: Florida-Parts-Z
3V2281 - Link AS 3K0996 7K9698 3V2282 8K5150 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 8K5150:
Information:
Specifications
Table 1
Parameter Value
Fuel Manifold Pressure 415 to 450 kPa (60 to 65 psi)
Fuel Transfer Pump Pressure 415 to 450 kPa (60 to 65 psi) Introduction
Use this procedure to check the regulated fuel pressure. Required Tools
Table 2
Required Tools
Qty Part Number
1 1U-5470 Engine Pressure Gp
Illustration 1 g01192577
1U-5470 Engine Pressure Group
(1) Pressure indicators
(2) Zero adjustment screw
(3) Pressure indicator
(4) Pressure tap
(5) Pressure indicator This tool group has an indicator that is used to read the pressure in the fuel manifolds. The Special Instruction, SEHS8907 is with the tool group.Test Preparation - Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 2 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2 Test Preparation - Fuel Transfer Pump Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 3 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2 Test Procedure - Transfer Pump and Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroug
Table 1
Parameter Value
Fuel Manifold Pressure 415 to 450 kPa (60 to 65 psi)
Fuel Transfer Pump Pressure 415 to 450 kPa (60 to 65 psi) Introduction
Use this procedure to check the regulated fuel pressure. Required Tools
Table 2
Required Tools
Qty Part Number
1 1U-5470 Engine Pressure Gp
Illustration 1 g01192577
1U-5470 Engine Pressure Group
(1) Pressure indicators
(2) Zero adjustment screw
(3) Pressure indicator
(4) Pressure tap
(5) Pressure indicator This tool group has an indicator that is used to read the pressure in the fuel manifolds. The Special Instruction, SEHS8907 is with the tool group.Test Preparation - Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 2 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2 Test Preparation - Fuel Transfer Pump Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 3 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2 Test Procedure - Transfer Pump and Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroug
Caterpillar parts catalog:
Parts link Caterpillar catalog:
3616, 920, 930, 930R, 950, 966C, 966R, 980, 980B, 992
4K9782
LINK ASSEM.
815, 816, 966C, 980, 980B
815, 816, 966C, 980, 980B
6K6352
LINK
950, 966C
950, 966C
4K3103
LINK
12E, 966C
12E, 966C
6K1645
LINK
966C
966C
966C
966C
5K5481
LINK
966C
966C
966C
966C