9C5060 LINK & BEARING AS Caterpillar parts
225, 225D, 229, 229D
Rating:
Alternative (cross code) number:
CA9C5060
9C-5060
9C5060
CA9C5060
9C-5060
9C5060
Weight: 170 pounds 77 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
13 Dec 2017
17037 Hundredths Pounds
CTP: CTP
Caterpillar LINK A (9C5060)
9C5060 Caterpillar Weight(lbs): 170.00
9C5060 Caterpillar Weight(lbs): 170.00
Number on catalog scheme:
6
For full view, you need register
Information:
Using Caterpillar Electronic Technician (Cat ET) to Determine Diagnostic Trouble Codes
Connect the Caterpillar Electronic Technician (Cat ET) to the machine. Turn the key start switch to the RUN position. Start the Cat ET. The Cat ET will initiate communications with the Electronic Control Modules on the machine. After communication has been established, the Cat ET will list the Electronic Control Modules. Choose the desired Electronic Control Module. After the diagnostic trouble codes have been determined with the Cat ET, see the test procedure for the corresponding diagnostic trouble code.Reference: Troubleshooting, "Service Tools"Active Diagnostic Trouble Codes
Illustration 1 g00859671
Typical Cat ET screen for active diagnostic trouble codes
The following procedures may cause new diagnostic trouble codes to be logged. Therefore, before any procedures are performed make a list of all the active diagnostic trouble codes in order to determine the system problems. Clear the diagnostic trouble codes that were caused by the procedure, when each procedure is complete.Note: Before performing a procedure, always check all the circuit breakers. Repair the cause of any circuit breaker that is tripped.A screen is provided in Cat ET for active diagnostic trouble codes. The screen will display the diagnostic trouble codes that are active. Active diagnostic information shall include a component identifier (CID), a failure mode identifier (FMI) and a text description of the problem.Logged Diagnostic Trouble Codes
Illustration 2 g00859762
Typical Cat ET screen for logged diagnostic trouble codes
A screen is provided in Cat ET for logged diagnostic trouble codes. The screen will display diagnostic trouble codes that are logged. The Cat ET will log diagnostic trouble codes that are intermittent. The logged diagnostic data shall include a CID, a FMI, and a text description of the problem. Also, the logged diagnostic data shall include the number of occurrences of the problem and two time stamps. The time stamp displays the first occurrence of the problem and the time stamp displays the most recent occurrence of the problem.Diagnostics are logged in non-volatile memory. On powerup, the ECU will clear any diagnostic trouble codes that have not been detected or active within the last 150 hours of machine operation.
Connect the Caterpillar Electronic Technician (Cat ET) to the machine. Turn the key start switch to the RUN position. Start the Cat ET. The Cat ET will initiate communications with the Electronic Control Modules on the machine. After communication has been established, the Cat ET will list the Electronic Control Modules. Choose the desired Electronic Control Module. After the diagnostic trouble codes have been determined with the Cat ET, see the test procedure for the corresponding diagnostic trouble code.Reference: Troubleshooting, "Service Tools"Active Diagnostic Trouble Codes
Illustration 1 g00859671
Typical Cat ET screen for active diagnostic trouble codes
The following procedures may cause new diagnostic trouble codes to be logged. Therefore, before any procedures are performed make a list of all the active diagnostic trouble codes in order to determine the system problems. Clear the diagnostic trouble codes that were caused by the procedure, when each procedure is complete.Note: Before performing a procedure, always check all the circuit breakers. Repair the cause of any circuit breaker that is tripped.A screen is provided in Cat ET for active diagnostic trouble codes. The screen will display the diagnostic trouble codes that are active. Active diagnostic information shall include a component identifier (CID), a failure mode identifier (FMI) and a text description of the problem.Logged Diagnostic Trouble Codes
Illustration 2 g00859762
Typical Cat ET screen for logged diagnostic trouble codes
A screen is provided in Cat ET for logged diagnostic trouble codes. The screen will display diagnostic trouble codes that are logged. The Cat ET will log diagnostic trouble codes that are intermittent. The logged diagnostic data shall include a CID, a FMI, and a text description of the problem. Also, the logged diagnostic data shall include the number of occurrences of the problem and two time stamps. The time stamp displays the first occurrence of the problem and the time stamp displays the most recent occurrence of the problem.Diagnostics are logged in non-volatile memory. On powerup, the ECU will clear any diagnostic trouble codes that have not been detected or active within the last 150 hours of machine operation.
Caterpillar parts catalog:
Parts link Caterpillar catalog:
215C, 219D, 225D, 229
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
225, 951B, 953, 955K, 955L, D5, D5B, D5E, FB221, OEMS
215B, 229
215B, 229
225, 951B, 953, 955L, D5, D5B, D5E, OEMS
3P3044
LINK-PIN END-LH
225, 951B, 953, 955L, D5, D5B, D5E, OEMS
225, 951B, 953, 955L, D5, D5B, D5E, OEMS
3P3043
LINK-PIN END-RH
225, 951B, 953, 955L, D5, D5B, D5E, OEMS
225, 951B, 953, 955L, D5, D5B, D5E, OEMS
225, 951B, 953, 955L, D5, D5B, D5E, OEMS
5V5528
LINK AS
225, 225D
225, 225D
9C4650
LINK & BEARING AS
225, 229
225, 229
8R9292
LINK
225D
225D
9C9077
LINK & BEARING AS
215B, 215C
215B, 215C
9C4650
LINK & BEARING AS
225, 229
225, 229
6W4338
LINK AS (BEARING)
235B, 235C
235B, 235C
6W4336
LINK AS
235B, 235C
235B, 235C
9V2079
LINK
245
245
9C5398
LINK & BEARING AS
215C, 215D
215C, 215D
235, 571G, 572G, 973, 977K, 977L, D7F, D7G, D7G2
235, 571G, 572G, 973, 977K, 977L, D7F, D7G, D7G2
235, 571G, 572G, 973, 977K, 977L, D7F, D7G, D7G2
235, 571G, 572G, 973, 977K, 977L, D7F, D7G, D7G2