9C8972 LINK AS Caterpillar parts
IT18F, IT24F, IT28F
Rating:
Alternative (cross code) number:
CA9C8972
9C-8972
9C8972
CA9C8972
9C-8972
9C8972
Weight: 38 pounds 17 kg.
INTEGRATED TOOLCARRIER,
Number on catalog scheme:
24
For full view, you need register
Information:
Illustration 1 g00102197
Loosen roller shaft clamping bolt (1) .
Move eccentric roller shaft (2) to a position that allows the ejector to pass over the bottom of the bowl. The ejector carrier rollers must be adjusted so that the clearance between the bottom of the ejector and the bottom of the bowl is between 1.0 to 13.0 mm (.40 to .51 inch).
Tighten roller shaft clamping bolt (1) .
Repeat Step 1 through Step 3 in order to adjust the other ejector carrier rollers.
Start the engine. Move the ejector forward and backward. Stop the engine.
Check for drag between the ejector and the bottom of the bowl. Repeat the adjustment procedure, if necessary.
Caterpillar parts catalog:
Parts link Caterpillar catalog:
9C8860
LINK AS
IT18F, IT24F, IT28F
IT18F, IT24F, IT28F
924G, 924GZ, 924H, 924HZ, 928F, 928HZ, 930G, 936, 936F, 938F, 938G, 938G II, G936, IT28F, IT38F, IT38G, IT38G II
2212857
LINK AS
611, 613C II, 615C
611, 613C II, 615C
9J0952
LINK AS
631E, 631G, 633D, 633E II, 637D, 637E, 637G
631E, 631G, 633D, 633E II, 637D, 637E, 637G
8W4772
LINK-FRONT STEERING
631E, 631G, 633E II, 637E, 637G
631E, 631G, 633E II, 637E, 637G
8J3221
LINK AS-INNER
633, 633D, 633E, 639D
633, 633D, 633E, 639D
9V1601
LINK AS
814B, 815B, 824C, 826C, 910E, 916, 926, 936, 950B, 966D, 966F, 980C, 980F, 988F, 988F II, 992D, G936, IT12B, IT14F
814B, 815B, 824C, 826C, 910E, 916, 926, 936, 950B, 966D, 966F, 980C, 980F, 988F, 988F II, 992D, G936, IT12B, IT14F
8Y7997
LINK AS
IT12B, IT14B, IT14F, IT14G, IT14G2
IT12B, IT14B, IT14F, IT14G, IT14G2
8R4234
LINK
910E, IT12B, IT14B, IT14F
910E, IT12B, IT14B, IT14F
8Y7943
LINK & BEARING AS
IT24F, IT28, IT28F
IT24F, IT28, IT28F
9C8974
LINK AS
IT18F, IT24F, IT28F
IT18F, IT24F, IT28F