LINK-TRACK MASTER 9G8737 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6192 Pliers 1
B 7B-7974 Piston Ring Expander Gp 1 Start By:
Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove". Note: Mark the components of each piston and connecting rod assembly. The components must be reinstalled in the original location. Do not interchange components.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01222629
Remove lower connecting rod bearing (9) from connecting rod bearing cap (10).
Remove upper connecting rod bearing (8) from connecting rod (6).
Use Tooling (A) to remove pin retainers (5) from piston body assembly (4).
Remove connecting rod pin (7) and connecting rod (6) from the piston body assembly.
Use Tooling (B) to remove top piston ring (1), intermediate piston ring (2), and oil control piston ring (3) from the piston body assembly.