LINK-TRACK MASTER 9G8738 - Caterpillar

Illustration 73 g01226243
Remove plate (108) .
Illustration 74 g01226246
Remove dowel rods (109) and springs (110) .
Remove discs (111) and remaining plates (112) .
Illustration 75 g01226247
Use two people to remove No. 3 planetary carrier (113). The weight of No. 3 planetary carrier (113) is approximately 30 kg (65 lb).
Illustration 76 g01226248
Remove gear (114) from the No. 3 planetary carrier (113) .
Remove O-ring seals (115) and (116) .
Illustration 77 g01225813
Invert No. 3 planetary carrier (113) and remove disc (117) .
Illustration 78 g01226250
Remove bearing race (118) .
Perform Step 34 through Step 40 in order to disassemble No. 3 planetary carrier (113) .
Illustration 79 g01226252
Remove thrust disc (119) .
Remove ring gear (120) .
Illustration 80 g01226254
Illustration 81 g01226262
Remove gear (121). Remove bearing (122) .
Illustration 82 g01226258
Remove bolts (123) .
Illustration 83 g01224051
Install Tooling (L) in carrier (125) and remove the carrier from transmission case (124) .
Remove O-ring seal (126) from the transmission case.
Illustration 84 g01226263
Remove seals (127) .
Illustration 85 g01226264
Remove bearing (128) .
Illustration 86 g01226265
Invert the transmission case. Remove bearing race (129) .
Illustration 87 g01226266
Remove bolts (130) and manifold (131) from transmission case (124) .