LINK 9T8054 - Caterpillar

Illustration 6 g01373148
Typical example of the instruction filmNote: Always maintain the control handles in the NEUTRAL position when you are not operating the power guards.
Illustration 7 g01372887
Typical illustration of both control handles in the NEUTRAL positionPower Train Guard
Illustration 8 g01099793
Note: Make sure that you begin with the control handles in the NEUTRAL position.
Shut off the engine.
Position a jack under the power train guard in order to lower the guard. The head of the jack should be touching the guard.
Remove the bolts from the power train guard.
Lower the jack 25 mm (1 inch).
Illustration 9 g01372888
Typical illustration of the control handle for the power train guard in the LOWER position
If the power train guard lowers completely with the jack, it is possible that the actuator has failed. Use the jack to support the power train guard and lower the power train guard to the ground. If the power train guard remains in place above the jack, remove the jack and rotate the control handle of the power train guard (4) into the LOWER position. Leave the control handle for the crankcase guard (5) in the NEUTRAL position.
Use the hand pump (3) to lower the power train guard.
Illustration 10 g01373018
Typical illustration of the control handle for the power train guard in the RAISE position
Rotate the control handle for the power train guard (4) into the RAISE position. Leave the control handle for the crankcase guard (5) in the NEUTRAL position.
Use the hand pump (3) to raise the power train guard.
Position the jack under the guard prior to replacing the bolts. The head of the jack should be touching the