LINK-TRACK 9W5933 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01126667
Align the oil hole in sleeve bearing (14) and the oil hole in adapter assembly (12). Use Tooling (A) and a suitable press to install sleeve bearing (14) into adapter assembly (12).
Install pipe plug (11) in adapter assembly (12).
Apply clean engine oil on sleeve bearing (14) and install shaft (15) in adapter assembly (12).
Install thrust washer (7) and bolts (8).
Position gear (9) on shaft (15) and install bolts (10).
Install O-ring seal (6) and O-ring seal (13) on adapter assembly (12). Apply clean engine oil on the O-ring seals.
Illustration 2 g01126654
Align the oil hole in sleeve bearing (3) and the oil hole in adapter assembly (1). Use Tooling (A) and a suitable press to install sleeve bearing (3) into adapter assembly (1).
Install O-ring seal (2) and O-ring seal (4) on adapter assembly (1). Apply clean engine oil on the O-ring seals.
Install pipe plug (5) in adapter assembly (1). End By:
Install the accessory drive (front). Refer to Disassembly and Assembly, "Accessory Drive (Front) - Install".