LINKAGE GP-BUCKET 2444262 - Caterpillar

Separation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7574     Link Bracket     1    
B     -     Forcing Bolt 1/2 - 13 by 3 inch     2    Start By:
Remove the transmission, the torque converter, and the transfer gears. Refer to Disassembly and Assembly, "Transmission, Torque Converter and Transfer Gears - Remove".
Illustration 1 g00517771
Support the transmission with suitable cribbing (1), as shown.
Illustration 2 g00829393
Disconnect clip (2) .
Illustration 3 g00829424
Install Tooling (A) and a suitable lifting device onto transfer gear case (3) .
Illustration 4 g01105387
Remove the nuts and bolts (4) that hold transfer gear case (3) to transmission (6). Install Tooling (B) to threaded holes (5). Use Tooling (B) to separate transfer gear case (3) from transmission (6) .
Illustration 5 g00829418
Remove transfer gear case (3) from transmission (6). The weight of transfer gear case (3) is approximately 340 kg (750 lb).
Remove O-ring seal (7) from transfer gear case (3). Remove O-ring seals (8) from transmission (6) .