LINKAGE GP-BUCKET 2512651 - Caterpillar

Illustration 1 g02542176
Table 1
Specification for 360-5358 Turbocharger
Item Qty Part Specification Description
1 2 283-4294 Clamp As Use the following procedure in order to tighten the clamp assemblies for the cartridges:
1. Tighten the clamp assemblies approximately to 20 N m (177 lb in).
2. Gently tap around the clamp assemblies with a soft faced hammer.
3. Again tighten the clamp assemblies to 30 2 N m (266 18 lb in).
4. Again gently tap around the clamp assemblies with a soft faced hammer.
5. Again tighten the clamp assemblies to 30 2 N m (266 18 lb in).
2 8 287-7200 Bolt Before assembly, apply Loctite C5A Copper Anti-Seize to the threads and to the bearing surfaces .
Tighten the clamp plate bolts to 40 3 N m (30 2 lb ft).