LINKAGE GP- 2897341 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01204258
Use two people to position load control valve (8). The weight of load control valve (8) is approximately 25 kg (55 lb). Install bolts (6). Connect hose assembly (7).
Illustration 2 g01204256
Connect hose assemblies (4) and tube assembly (5). Install bolts (3).
Illustration 3 g01204175
Use a suitable hex wrench in order to tighten seat (2). Tighten nut (1) to a torque of 2.25 0.25 N m (20 2 lb in).
Illustration 4 g01196137
Remove Tooling (A) from the hydraulic tank.